Â
Product Classification  | |
Portfolio  | Blrand ® |
Brand  | Blrand ® |
Product Type  | Twisted pair cable |
Regional Availability  | Asia   |   Australia/New Zealand   |   EMEA   |   Latin America   |   North America |
   | |
Standards And Qualifications  | |
EN50575 CPR Cable EuroClass  | Dca   |   s2   |   d2   |   a1 |
   | |
Cross Section Drawing  | |
 Click on image below to enlarge. | |
   | |
Construction Materials  | |
Jacket Material  | Low Smoke Zero Halogen (LSZH) |
Conductor Material  | Bare copper |
Drain Acirc; Â | Tinned copper |
Insulation Material  | Polyolefin |
Separator Material  | Polyolefin |
Shield (Tape) Material  | Polyester/Aluminum shield |
   | |
Dimensions  | |
Cable Length  | 305 m   |   1000 ft |
Cable Weight  | 35.15 lb/kft |
Diameter Over Jacket, nominal  | 7.518 mm   |   0.296 in |
Jacket Thickness  | 0.508 mm   |   0.020 in |
   | |
Electrical Specifications  | |
ANSI/TIA Category  | 6A |
dc Resistance Unbalance, maximum  | 4 % |
dc Resistance, maximum  | 8.00 ohms/100 m |
Mutual Capacitance at Frequency  | 5.6 nF/100 m @ 1 kHz |
Nominal Velocity of Propagation (NVP)Â Â | 68 % |
Operating Frequency, maximum  | 500 MHz |
Operating Voltage, maximum  | 80 V |
Remote Powering  | Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A |
Transmission Standards  | ANSI/TIA-568-C.2 |
   | |
Environmental Specifications  | |
Environmental Space  | Low Smoke Zero Halogen (LSZH) |
Smoke Test Method  | IEC 61034-2 |
Acid Gas Test Method  | IEC 60754-2 |
Flame Test Method  | IEC 60332-3-22 |
Installation Temperature  | 0 °C to +60 °C (+32 °F to +140 °F) |
Operating Temperature  | -20 °C to +60 °C (-4 °F to +140 °F) |
   | |
General Specifications  | |
Cable Type  | F/UTP (shielded) |
Packaging Type  | Reel |
Pairs, quantity  | 4 |
Cable Component Type  | Horizontal |
Jacket Color  | Blue |
Product Acirc; Â | 3291B |
Conductor Gauge, singles  | 23 AWG |
Conductor Type, singles  | Solid |
Conductors, quantity  | 8 |
Drain rc; Â | 24 AWG |
Drain c; Â | Solid |
Separator Type  | Isolator |
   | |
Mechanical Specifications  | |
Pulling Tension, maximum  | 11 kg   |   25 lb |
Regulatory Compliance/Certifications
Agency | Classification |
RoHS 2011/65/EU | Compliant |
ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
CENELEC | EN 50575 compliant, Declaration of Performance (DoP) available |