Fire alarm control panel SR-P01-16

Fire alarm control panelÂ

SR-P01-16Â 16 zones conventional fire alarm control panel

The SR-P01 Series Conventional Fire Alarm Control Panel is a 24 volt, four to sixteen-zone, Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective SR-P01 Series can be used in a variety of low- to mid-sized applications.

 Main features:Â

Four, Eight, Sixteen Zone Style B (Class B) Initiating Device Circuits (IDCs), All zones accepttwo-ectors and any normally-open devices.Two Supervisory Input with DC12V output, ideal to connect security alarm devices.Three General Alarm, Trouble and Supervisory, Form A Relay Output.One, Two, Four Built-in Sound Output, Style Y (Class B) Notification Appliance ((NACs), NACs may be programmed: n-n>3.0 amps of total system power. Resettable DC24V & Non-resettable DC24V Output.Zone Input Short Circuit can be set to “Alarm” or “ Fault” mode.RS485 Communication Port (optional).Automatic/Manual mode can be programmed.Disable/Enable control per Zone (IDC) can be programmed.Disable/Enable Sound Output(NACs) can be programmed.

Main features:Â

AC POWER: 220VAC, 50 Hz.BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp fornormal flat charge. Maximum battery charger capacity: 18AH battery.NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separatebattery box.Total DC24V system power: 3.0 amps.Maximum current per NAC: 1.25 amps.Maximum battery charging capability: 18 AH.Resettable four-ector power output.Non-resettable power output.Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC(resistive), 2.0 amps @ 30 VAC (resistive)