Diesel Generator Set Data
Set Type: XG-110GF
Standby Power: 110KW/137.5KVA
Prime Power: 100KW/125KVA
Rated Current: 180(A)
Rated Frequency: 50(Hz)
Start-up time: 5～6(s)
Power Factor: 0.8(Lag)
Rated Voltage: 400/230(V)
Standard Features
1. Engine: VOLVO TAD532GE
2. Radiator 50℃ max
3. Fans are driven by belt, with safety guard
4. 24V charge alternator
5. Dry type air filter, fuel filter, oil filter
6. Alternator: single bearing alternator
7. IP23, insulation class H/H
8. Main uit breaker
9. Standard control panel
10. Absorber
11. Muffler
12. User manual
| Diesel Engine Data | ||
| Manufacturer: | VOLVO | |
| Model: | TAD532GE | |
| Standby/Prime Power: | 128KW/117KW | |
| Rated Speed: | 1500（r/min） | |
| Cycle: | 4 stroke | |
| Cylinder Arrangement: | 4 in t> | |
| Displacement: | 4.76L | |
| Bore and Stroke: | 108*130（mm） | |
| Compression Ratio: | 18:1 | |
| Governor Type: | Electronic | |
| Start battery voltage: | 24V DC | |
| Air Intake System | ||
| Air Intake System: | Turbo | |
| Max Intake Restriction: | 3.5kpa | |
| Burning Capacity: | 8.03m3/min | |
| Air Flow: | 174 m3/min | |
| Exhaust System | ||
| Exhaust Gas Flow: | 23.2 m3/min | |
| Exhaust Temperature: | 532℃ | |
| Max Back Pressure: | 5kPa | |
| Fuel System | ||
| Fuel System: | Directly Injection Fuel System, Bosch Pump | |
| 100%( Prime Power) Load: | 206g/kwh | |
| 50%( Prime Power) Load: | 221g/kwh | |
| Oil System | ||
| Total Oil Capacity: | 13L | |
| Oil Consumption: | ≤0.08L/h | |
| Engine Oil Tank Capacity: | 11L | |
| Oil Pressure at Rated RPM: | 450-480kPa | |
| Cooling System | ||
| Cooling Way: | Water-cooled | |
| Total Coolant Capacity: | 20.2L | |
| Thermostat: | 83-95℃ | |
| Max Water Temperature: | 105℃ | |
| Alternator Data | ||
| Manufacturer: | STARLIGHT/STAMFORD/SIEMENS/MARATHON/ENGGA /KEPU | |
| Excitation Mode: | Brushless and self- exciting | |
| of se and Access Act: | 3-se 4-d> | |
| Connecting Type: | "Y" type connecting | |
| Alternator Capacity: | 125KVA | |
| Alternator Efficiencies: | 95ï¼… | |
| Overload: | （PRP）110% load can run 1h | |
| Protection Level: | IP22-IP23 | |
| Insulation Class, Temperature Rise: | H/H | |
| Influence Factor (TIF): | ＜50 | |
| THF: | ＜2% | |
| Voltage Regulation, Steady State: | ≤±1% | |
| Air Cooling Flow: | 0.514m3/s | |
| Altitude: | ≤1000m | |
Signup today to claim your Discount. Get Started before it's too late!
