GMP-1600 Goniophotometer Test System

GMP-1600 Goniotometer Test System

1. Introduction:

GPM-1600 Goniotometer test system is designed according to CIE Pub.NO.70, CIE121, IESNA LM-79, IESNALM-75 and etc. Goniotometer system is applied to test the tometric parameters of streetlight, downlight, room lighting fixture and project lighting fixture, like luminous intensity distribution, luminous intensity at any angles,glare, effective beam angle, total luminous flux, upward luminous flux ratio, downward luminous flux ratio, luminaire efficiency, utilization factor, luminance limitation curve,glare grade,and electric parameters (voltage, current, power, power factor, frequency).

2. Configuration:

1) GPM-1600 goniotometer:

● Rotating console: Adopts German angle encoder system, and the rotation base can easy to mounting the lamps.

● Constant temperature to-detector: fi<3%

● Double channel tometer: low drifting, high accuracy

● 3-D English software: can output IES file, LDT file, CSV file, CIE file and etc.

● Cross-beam laser alignment device for calibration

● Clamps for lamp mounting

2) Luminous intensity standard lamp

WT104 digital power meter (AC/DC): voltage (0-600V), current(0-20A), power, power factor (-1.000~1.000), frequency ( 45Hz-130Hz); accuracy:±0.4%+0.1%range+1digit

3) WL3010 CC&CV DC power supply: 30V/10A, sine-wave, constant current and constant voltage output. Output voltage: DC 0.005V～30.00V; Output current: 0.005A～10.00A, output power: 300W (max)

4) CHP-1000VA AC power supply: 1KVA, power the luminiare under test. Output frequency: 45-65Hz, 50/60Hz; Output voltage: 0.0-300.0V; Output current: ≤8.4A at 110V, ≤4.2A at 220V

5) 19 inch cabinet: put the overall control system

6) Computer and printer: prepare by user