| Material | Quality Metals |
| Color | Gray |
| Power | Mechanical |
| Packaging | Wooden case |
| Shipment | By air or sea |
Shore A Durometer hardness tester
Hardness tester is used to determine the hardness of vlucanized or thermoplastic rubbers.Â
Standards:Â ISO 7619, ISO 868, ASTM D 2240, DIN 53505Â etc.
Shore A durometer is for rubbers in the normal-hardness range.
Shore D durometer is for rubbers in the high-hardness range.
Shore C durometer is for rubbers in the low-hardness range and for lar rubbers.
Main parameters
Model | AT-R7002 |
Temperature range | RT~200℃ |
Minimum temperature display | 0.1℃ |
Temperature fluctuation range | ±0.15 celcius degree |
Heating rate | About 15 celcius degree/min |
Temperature display resolution | 0.01℃ |
Temperature recovery time after clamping | ＜1.5min |
Temperature unit | ℃, ℉, |
Die cavity | Biconical, closed system, Sealed |
Torque range | 0~20N.m |
Torque minimum reading | 0.001N.m |
Oscillation angle | ±0.5°(Standard), ±1°, ±3° |
Oscillation speed | 100r/min (1.67Hz) |
Torque accuracy | 0.3% |
Torque unit | , N.m, dN.m, Â |
Data acquisition rate | 200Hz |
Calculated data | TS1, TS2, T10, T30, T50, T70, T90, VC1, VC2 |
Software connection | USB |
Test report printed contents | Date, time, temperature, vulcanization curve, temperature curve, ML,MH, TS1, TS2, T10, T50, T90, VC1, VC2 |
Power supply | 220V+/-10% or specified |
Air source | Min. 0.6Mpa |
The pricing in the page is only for reference, please directly with us for more details based on order requirements.
Signup today to claim your Discount. Get Started before it's too late!
