| Knife Roll | Solid Knife Roller |
| Blade material | SKD-11 or Customized |
| Material feeder size | Up 12mm flakes or granules |
| Bearing brand | SKF or NSK |
| Blade type | Disc |
| Motor power | 37~90Kw |
| Motor control | By Inverter |
Application:Plastic recycling pulverizer is used for fine grinding in plastics, energy, chemical, environmental protection and other industries. It can be widely used for grinding low-pressure polyethylene HDPE, high-pressure polyethylene LDPE, lyethylene LLDPE, polycarbonate PC, polyethylene Grinding of plastic recycled pellets from styrene PS, propylene butyl styrene ABS, foamed PE, SBS and other materials;Grinding machine structure and features:A1: The Plastic recycling pulverizer is fully automated, with automatic feeding, discharging, sorting, and grinding; the newly designed special bearing seat reaches high speeds, and the grinding process is fully sealed without dust leakage.A2: The smaller cross-section of the grinding chamber of the Plastic recycling pulverizer allows the material to be immediately caught, ground and removed as soon as it enters, which avoids the decomposition of the material due to temperature rise, resulting in higher output.A3: The temperature of the rubber material after grinding by the Plastic recycling pulverizer is below 60 degrees. The powder is fine and elastic. Its sical properties will not be destroyed. The ground powder can be directly added to new materials for use.A4:The grinding disc of thePlastic recycling pulverizer can be adjusted simply by using a feeler gauge and adjusting bolts. The cooling system of the grinding chamber of the grinding disc adopts a combination of air and water cooling.A5: The Plastic recycling pulverizer has a power of 37KW-110KW and can work 24 hours a day. The operator only needs to directly feed the leftover materials into the feeding barrel, and it can be automatically ground into powder. It is very simple and convenient to operate by one person.A6: The advantage of the Plastic recycling pulverizer is that in terms of waste addition, each hand can add 3-5KG more powder, and each foaming bed can increase 3-5mm without causing white spots. The production time of the machine is short, the output can be increased by 10-20%, and the mixing shaft is not easy to break.A7: The Plastic recycling pulverizer uses stainless steel to make a double-layer pipe cyclone, which occupies a small area and is easy to maintain. New tool structure increases output and overcomes tool wear resistance.
Features:1. Compare with same type pulverizer, the capacity of this mode is more higher2. Equipped with dust collection device to reduce dust pollution.3. Close blower for discharge can reduce labor intensity of worker4. the cover of main machine can be opened for maintain5.the cooling of machine have wind cooling and water cooling, it can cool the machine body very good.
Technical datas:
Item Model | MF-400 | MF-500 | MF-600 | MF-800 |
Main Motor(KW/hp) | 22/30 | 37/50 | 45/60 | 45/100 |
Total Power(KW/hp) | 26/35 | 44/59 | 54/72 | 88/118 |
Blade Material | SKD-11 | SKD-11 | SKD-11 | SKD-11 |
Capacity | 50-300kg/hr | 80-500kg/hr | 120-800kg/hr | 200-1200kg/hr |
Vibration Sieve | ZDS-800 | ZDS-1000 | ZDS-1000 | ZDS-1200 |
Dimensions(mm) |
Tell Us What You NEEDPremium Products
Connect with Verified BuyersSignup today to claim your Discount. Get Started before it's too late! 
|
