Cylindric tuning fork Crystal 32.768khz 3*8mm

The tuning fork crystal oscillator 32.768 khz features:

1、Description: Tuning Fork Quartz Crystal

2、Nominal Frequency: 32.768KHz

3、Oscillation Mode: Fundamental

4、Cutting Mode: x +2° cut

5、Measurement Instrument: S&A 250B(Calculated FL)

Tuning fork crystal oscillator Electrical Characteristics:

Operation Conditions:3*8 mm 32.768khz watch crystal, cylinder type

Tuning g fork crystal oscillator dimensions: mmNot recommended reflow furnace welding,

If it is to be used, the maximum temperature shall not exceed 230℃

Mounting method to PCB

When the crystal products need to be lay down please fix to PCB securely

If the crystal is used with mechanical vibration location, please put cushion in between PCB or fix with

elasticity glue (Silicon etc) as shown in below figure. Please don’t gluing hermetic seal grass

When the crystal products need to be mounted vertically, gap between crystal units and PCB

more than 3mm for 3×8 type , more than 2mm for 2×6 type is recommended

For more information, kindly us !