T-Crystal Dental Zirconia Sintering Furnace (Box Type)
This box type dental zirconia sintering furnace adopts high purity polycrystalite fiber as furnace material, which is light in weight, small in volume, and only 1.5 KW in power. It is suitable for small laboratories and even a family working environment.
Dental Zirconia Sintering Furnace Features
T-Crystal is specially designed for the sintering of small-batch samples of zirconia denture crystal, structural ceramics, and polymer ceramics.
Max temperature: 1700℃
Working temperature: 1600℃
Automatic program for heating. It’s very convenient for dental crown firing.
7 inch HD touch screen, easy to operate, can store 30 different processes programs.
The rated power is only 1.5kW, which is suitable for any small lab.
High speed temperature increasing, 0-40℃/min.
4pcs Mosi2 heating span>
1 year warranty.
Technical Parameters
chamber size | 100x100X100mm |
Max. temperature | 1700 ℃ (<2hour) |
Working temperature | 800-1600℃ |
Temperature controlling | â— PID automatic control via SCR (Silicon Controlled Rectifier) power control with se angle fired, current limiting resistor.â— Touch screen panel for Dental Zirconia Sintering Furnace which can store 30pcs different programsâ— Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.â— Over-temperature protection and alarm allow for operation without an attendant. |
Temperature accuracy | ± 1℃ |
Temperature Uniformity | ± 5℃ |
Heating rate | 0-40℃ /min |
Thermocouple | B type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube |
Heating an> | U type MoSi2 heating pan> |
Furnace Chamber | Three layers of ceramic fiber insulation materials◠First layer: 1800℃ ceramic fiber board◠Second layer: 1600℃ ceramic fiber board◠Third layer: 1260℃ ceramic fiber board |
Furnace structure | Double layer steel casing with dual cooling fan, surface temperature below 60℃ |
Outer dimension | About 410X380X610mm |
Working voltage | 220V, 50HZ/60HZ, 1 se (As per your order) |
Rated power | 1.5KW |
Weight | Net Weight: about 58kgsGross Weight: about 78kgs |
Warranty | â— For this Dental Zirconia Sintering Furnace, One year limited warranty with lifetime support. (Consumable parts such as heating ibles are not covered by the warranty, please order the replacement at related products)â— ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. |
Certifications | CE |
Application Notes | |
Using Attentions | ◠The cooling rate of this Labsnova dental sintering furnace shall also not exceed 10 °C /min.◠osive gases are not recommended for use with this furnace without necessary safety controls and supervision.◠Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.◠A refractory door block must be inserted before closing the door. |
Please leave information, our professional staff will you the first time! (Reply within 12 hours and soonest within 2 minutes.)
Signup today to claim your Discount. Get Started before it's too late!
