| Model | LT-100WSL-LENS |
| Certification | ISO, CE, RoHS, LM80, TM |
| Wattage | 100 |
| Weight | 3.110 Kg |
| of LEDs | 100 |
| Optical lens | Polycarbonate 90 degree lens |
| LED Brand | OSRAM/Cree/Edison/Crescent/Kwality/Samsung (As per requirements) |
| Power Consumption | 100W |
| LED Lumens Efficiency | 140 Lumens / Watt |
| Maximum Lumens | 14000 lm |
| Beam Angle | 90 Degree with Lens |
| LED Working Voltage | +6.2 VDC |
| LED Working Current | 150mA |
| Input Voltage | 85 – 300 VAC(Auto cut off above 310V)(Protection up to 440 V) |
| Operating Frequency | 50/60 Hz |
| Power Factor | >0.95 |
| Ambient Temp(Ta) | 50â°C |
| Case Temp(Tc) | 75â°C |
| CRI | 80 |
| Efficiency | >87% |
| Color | White/Warm White (As per order) |
| Color Temperature | 2700-6500K (As per order) |
| Body Type | Pressure die cast Aluminum alloy for housing gear, Extruded aluminum lamp housing (heat sink) for Better heat transmission. |
| IP rating | IP65/IP66 |
| Working Hours | >50000 hours |
| Surge Protection | Inbuilt Driver surge protection – 4 KV Extra SPD surge protection – 10 KV (As per Requirement) |
| Electrical Protections for LED Driver | - Single shot no-load latching protection / output short-circuit protected with auto-recovery -Under voltage protection -Output short circuit protection - Auto-recovering thermal shutdown with large hysteresis protects Both components and printed circuit board - No damage during brown-out conditions |
| LED PCB Detail | Thickness 1.6 mm (±5% tolerance) PCB material – Aluminum-copper Copper layer thickness – Standard 0.35 micron Copper conductivity – 1 Watt |
| Additional Features | - Plug & Play Device - Corrosion free Body Material, Dust proof, Rugged - Easy to Install, Easy to maintain- Suitable in any Environmental Condition - Save Up to 70% of Electricity |
| Terminology | Earth – Green or Yellow tive – Red or Brown Neutral – Blue or Black |
Signup today to claim your Discount. Get Started before it's too late!
