H Beam Production Line 4000mm Heavy Steel Sheet CNC Plasma Cutting Machine

CS SS Plate Profile Cutting Machine with best terms can be applied in lot size straight steel plate cutting, as well as various geometric shape cutting.The main frame is annealed to remove the stress, stable and endurable. The servo motor, reducer, pressure release valve, air pipe and magnetic valve as well as cutting gun used are all world famous brand to ensure exnt performance.The CNC cutting machine us imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and oadwise cutting gun all use imported supporting chain, safe and neat.Brief Introduction:1. The CNC flame cutting machine is guide rail fixed, gantry gate move type;2. The flame cutting guns will cut the flange and web of H beam;3. Cross arm operation accuracy is within 0.5mm/m;4. Oxy and acetylene or oxy and acetonum gas as fuel source;5. Guide rail length is 14M*2PCS;6. X axis Panasonic servo and pilot reducer driven, Y axis Panasonic servo and pilot reducer driven;7. CNC system: Hypertherm EDGESupply scope:Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.Track unit: Guide and accessories. The guide size is 14m*2PCS.Cutting torch unit: ngle cutting gun*10PCS and accessories.Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.Spare parts: 1 set

CNC flame/plasma gas cutting machine can be applied in lot size steel sheet straight cutting, as well as irregular geometric shape cutting. The main frame is annealed to remove stress, stable and anti-weary. The servo motor, reducer, pressure release valve, air pipe, magnetic valve as well as cutting guns used are all world famous brand to ensure exnt cutting performance.Specification:The cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and oadwise cutting gun all use imported supporting chain, safe and neat.