Factory Stranded Conductor 4pairs 8cores SFTP Cat6 Patch Cable

Cat.6 4 pairs shielded twisted pair can be used in horizontal wiring and trunk a transmission carrier for voice, data, image, multimedia, etc., mainly used in complex electromagnetic environment, strong interference places and high security units, such as factories, Shield machine rooms, airports, hospitals, government agencies, military agencies, banks, financial institutions, etc.

Features:

1. Meets the 250MHz bandwidth requirement specified by Cat.6 in accordance with the TIA/EIA568-C.2 standard.

2. The core adopts 4 pairs of solid core oxygen-free copper conductors with a conductor diameter of 0.57mm, and the purity can reach 99.999%.

3. Center cross-divided design reduces the loss caused by near-end crosstalk (NEXT) between pairs.

4. It adopts integral aluminum foil shielding to effectively resist external electromagnetic interference.

5. sical properties: maximum tension 110N, bending radius ≥32mm when fixed, bending radius ≥65mm when pulling.

6. Electrical performance (typical): Insulation voltage 2500V, 2Sec (DC), characteristic impedance 100Ω, conductor resistance 75Ω/Km, capacitive reactance 50pF/m, transmission delay 500nS/100m, delay deviation 30nS/100m.

7. Cable outer diameter: 7.2 ± 0.2mm, plugging cycle > 1050 times

8. not less than 0.57mm

9. Packing: 305 m / shaft

Standardization:

1. YD/T 926.2-2009

2. GB50311-2007

3. ISO/IEC 11801-202 ed2.0

4. ANSI/TIA 568-C.2

Ordering information:

Note: The above is the regular color. If you need other color cables, please specify when ordering.