Dears, Good day Trust you are well. Kindly provur best price offer for the following: 1) UV lamp to impinge on evaporator 2m x 2m for an AHU 2) UV lamp to impinge on evaporator 5m x 2m for an AHU Comment: UV dosage need be in the range of 50uW cm^2-100uW cm^2 upon UV dispersion on entire coil with the upper value being the most Show More...
Dears, Good day Trust you are well. Kindly provur best price offer for the following: 1) UV lamp to impinge on evaporator 2m x 2m for an AHU 2) UV lamp to impinge on evaporator 5m x 2m for an AHU Comment: UV dosage need be in the range of 50uW cm^2-100uW cm^2 upon UV dispersion on entire coil with the upper value being the most preferred. Accordingly, we are looking to treat the Evaporator coil. We don't think that would require much UV intensity as time will take care of killing the lingering pathogens. In both of the above cases we may require a parabolic reflector in order for the light to spread over and cover an area of the evaporator coil. Possibly, a UV light Configuration where the dual UV lamps are situated in the mthe device to offer symmetry where they would shine in both directions ,covering an area of left and right or top and bottom. We need minimize on the No. of UV lights to be employed. Kindly advise on the intensity of your UV light and the other specs and whether or not a parabolic configuration is needed? Further you may also propose a solution to r airborne contaminants on the fly. This would require a UV array box to be installed in the duct run. We will be looking at both options and propose to client. We will require like forty (65) pcs of the above. Kindly note we are a trader and are competing against other brands. We therefore require your bottom rock price in order to bd. We have exnt prospects of winning this bed we give in a competitive price offer. Also client requires the UVs to be installed without further ado. In light, kindly advise on available stock or lead time along with your quotation. We will require to purchase some samples for a test installation. In short conclusion, we may be looking at the following: a) 41W UV lamp 843mm-1m with Ballast giving an intensity of 50uW cm^2 over the size of 2 m x 2 m coil (probably 1 or 2 pcs be enough) We may require a reflector in order to disperse the light across the evaporator. See if this would be a requirement. (254nm) b) 41W UV lamp 843mm-1m with Ballast giving an intensity of 50uW cm^2 over the size of 5 m x 2 m coil (probably 2 or 4 pcs be enough) (254nm) c) UV lamp with a Ballast 177W or 200W (Lamp reflector 2.5 in Anodized aluminum parabolic) 230V 120V 50 60Hz (With 50hz being the must requirement). UV lamp length 60in (254nm) d) UV lamp with a Ballast 350W (Lamp reflector 2.5 in Anodized aluminum parabolic) 230V 120V 50 60Hz (With 50hz being the must requirement). UV lamp length 60in (254nm) We may prefer lips made UV lights if pricing is desirable. Your urgent feedback is much appreciated. Best Regards, Eng. Rami Awami Alawami Air Conditioning Central Manama Bahrain Mobile (
Signup today to claim your Discount. Get Started before it's too late!
