Request quote We are a Tunisian company manufacturing pallets and other wood packaging always. It does this by looking for a quote to buy wood with the following conditions: Hardwood low density: EX: Pin wood The wood will be to manufacture pallets must be put to the test appliquation. Bending test, test surface friction and fa Show More...
Request quote We are a Tunisian company manufacturing pallets and other wood packaging always. It does this by looking for a quote to buy wood with the following conditions: Hardwood low density: EX: Pin wood The wood will be to manufacture pallets must be put to the test appliquation. Bending test, test surface friction and falls. For this, the wood must be with these requirements: Nodes: The nodes should not exceed in diameter third of the whe board. Warping: A maximum deflection of a length of '' 48'' is acceptable. Decane: Wane on the corner boards must not exceed 1 6 of the whe board and 3 1 its thickness. Overheated: Wood overheated in places nailing is not tolerated. At other locations, a maximum of 1 4 "of the length of the board is enabled. Slots or checking: The length of a gap should not exceed the whe respective board. It's condition must be met 90% The nails used are twisted kind should not that be through cracks or pallets make great slot. Treated wood according to INMP 15 standard for light manufacturing pallets. And not traited. Each lot and each delivery shall be stamped and insavity must have the of your certification. So I can do it again on pallets. dimension: 18x75x1200 18x75x800 75x75x1200 Thank you for give me a price for 1 m3 the well indicated incoterm and transit-time. Grade: A or A B Preferably a CIF price port Tunisie