Rectifier modules TEBECHOP 12000 48 V - 200 A will be retrofitted rectifier device BenningRectifier module TEBECHOP 12000 48 V - 200 A Peculiar propertiesW voltage range (85-264 V)High efficiency (up to 93%), including at low loadsSimple installation and maintenance thanks to the use of architecture hot plug* The digital interface in e Show More...
Rectifier modules TEBECHOP 12000 48 V - 200 A will be retrofitted rectifier device BenningRectifier module TEBECHOP 12000 48 V - 200 A Peculiar propertiesW voltage range (85-264 V)High efficiency (up to 93%), including at low loadsSimple installation and maintenance thanks to the use of architecture hot plug* The digital interface in each rectifier allows control and management of the modules, includingremote monitoring of the entire system.IPU CharacteristicThe TEBECHOP rectifiers support a constant power output characteristic (IPU) thatallows maximum use of the power output of the rectifier under intensive batterybatteries after power off. In this case, the rectifier provutput current of 20% morenominal (see gra.TEBECHOP hot-plug, front panelLCD display and control keys on the front panel of the rectifier TEBECHOP hot-plug (48 V - 200 A)offer the user extensive information about the status of the rectifier and the ability to control the module.5-segment LCD display shows the output voltage, output current, temperature, and all workingmodes of the module.Interface (SV-Sig)Each TEBECHOP hot-plug rectifier has a built-in digital interface (microcontroller) to communicate withother rectifiers in parallel included and with MCU control system.Output power [*1200019 6681 Input voltage[V]85 - 264176 - 26485 - 264360 - 460Input current[A]6,38,51317Frequency[Hz]47 - 63Power factor 0,990, 990,990,94Output current48 IN[A V[A] -2750160Output naprashivaetsa softwareAccelerated charge[V El.]2.4Supporting charge [V El.]Is 2.23Direct power[V El.]2,05Battery testing [V El.]1,8Stability (UA)Static[%]+ - 1Dynamic[%](10 100 10) (di dt>200s)+ - 5+ - 4Time to rise. stabilization [MS]< 5< IPU P-constantSurge voltage [mV] 2Class EN 55022 class BClass 1-EN 60950Safety 60950Mechanical protection IP 20VentilatiegatenTemperature range, GRD. [C]0 - 40The height above U. M. [m]up to 2000 mHumss f DIN 40040Display out. current-Measuring terminals-Display out. voltage-Measuring terminals-Optical indication on the front panelNetwork yellowIncreased voltage RedWorking greenAccularityFan crash RedFuse tripped Red LCDSizeHeight (front panel) [mWepth [mWeight [kg]2,75,84,822,0* reduced power when mains voltage is below 205 V
Signup today to claim your Discount. Get Started before it's too late!
