Ash Fusion Analyzer

Ash Fusion Analyzer :: IF2000G-HDC / IF2000G-HDBM Uses Latest technology in the service of the fusion temperature determinations IF2000G-HDC for Coal Ash and Coke Ash samples IF2000G-HDBM for Biomass Ash, Refuse-Derived Fuel (RFD) Ash, and Solid mineral fuel Ash, solid bio fuel Ash. Sylab Ash Fusion Analyzer automatically determines four critical temperatures: Deformation Temperature, Softening Temperature, Hemispherical Temperature and Fluid Temperature. It is a Fully automatic instrument for determining the ash fusion points by means of image analysis. Sylab's Ash fusion Analyzer uses modern technology for monitoring, computing, storing results and curves obtained during the test. Up to 6 samples can be analysed in each batch. Precisely controlled high temperature horizontal resistance furnace. Programmable furnace temperature ranges. Maximum furnace temperature: IF2000G-HDC : 1600 deg C and IF2000G-HDBM : 1800 deg Furnace is capable to work at both oxidizing and reducing atmospheres. Programmable ramp rates from 1deg C to 12 deg C.Temperature Resolution 1 deg C.Accepts six samples either cylinder, pyramid or cone.High Strength Four element heating furnace.ŸWork tube with integrated light for samples having low initial deformation temperatures.ŸDigital over temperature protection with high alarm relay High Resolution Integrated camera Integrated high resolution camera which is isolated from the high temperature area to improve camera life.Temperature is identified by quickly scrolling through the stored images.Capable to record the complete analysis video and digital capture of the images .Adjustable grid scale for each test specimen.Grid overlay feature for accurate comparison of sample height and width.Accepts specimens having Cylinder, Pyramid and Cone shapes from 3mm x 3mm to 6mm x 6mm x 19mm dimensions.Direct specimen capturing without using mirrors for accurate and precise fusion temperature measurements. Controller All test results comply with ASTM, CEN/TS, ISO and DIN test methods. Storage of individual sample pictures (1 deg C by 1 deg C)Ÿ Inbuilt CO/CO2 and CO2/H2 gas mixtures (or) capable to accept pre mixed gasesŸGases: CO/CO2 & CO2/H2 mixture ready to use, additional feature include CO, CO2, H2 separate entries, and mixture automatically made by the analyzer. Oxidizing atmospheres by inbuilt Air Pump (or) External Air CompressorAutomatic air flow cooling for the furnace + CO/CO2/H2/Air exhaust tube to the lab hoodŸ Inbuilt flow meters for oxidising and reducing gas flow Sylab AFT Software – where fusion tests meets innovation Sylab AFTsoftware gives complete solutions for your Ash Fusion analysis Easy to use windows based software ,Can use samples from 3mm x 3mm to 6mm x 6mm x 19mm dimensions. Automatic sample shape identification , continuous recording of sample images, real time monitoring of the samples and test process, system is equipped with High resolution CCD camera. The whole test process will be monitored in real time. Option is available to replay the stored images for finding the sample characteristics agains temperature raise. Test Protocols  Automatic sample shape identification, Continuous recording of sample images. Test protocols, as per ISO, ASTM, CEN/TS, DIN, CEN/TR and BIS test methods are included, in addition to simulated analysis features using recorded picture of a previous analysisAutomatic identification settings are included in the setup, sample shape automatic recognition and computed points are automatically set according to the selected norms.