LAN Copper Cable

Product Specifications Product Classification   Portfolio   Blrand ® Brand   Blrand ® Product Type   Twisted pair cable Regional Availability   Asia   |   Australia/New Zealand   |   EMEA   |   Latin America   |   North America     Standards And Qualifications   EN50575 CPR Cable EuroClass   Dca   |   s2   |   d2   |   a1     Cross Section Drawing    Click on image below to enlarge.     Construction Materials   Jacket Material   Low Smoke Zero Halogen (LSZH) Conductor Material   Bare copper Drain Wire Material   Tinned copper Insulation Material   Polyolefin Separator Material   Polyolefin Shield (Tape) Material   Polyester/Aluminum shield     Dimensions   Cable Length   305 m   |   1000 ft Cable Weight   35.15 lb/kft Diameter Over Jacket, nominal   7.518 mm   |   0.296 in Jacket Thickness   0.508 mm   |   0.020 in     Electrical Specifications   ANSI/TIA Category   6A dc Resistance Unbalance, maximum   4 % dc Resistance, maximum   8.00 ohms/100 m Mutual Capacitance at Frequency   5.6 nF/100 m @ 1 kHz Nominal Velocity of Propagation (NVP)   68 % Operating Frequency, maximum   500 MHz Operating Voltage, maximum   80 V Remote Powering   Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A Transmission Standards   ANSI/TIA-568-C.2     Environmental Specifications   Environmental Space   Low Smoke Zero Halogen (LSZH) Smoke Test Method   IEC 61034-2 Acid Gas Test Method   IEC 60754-2 Flame Test Method   IEC 60332-3-22 Installation Temperature   0 °C to +60 °C (+32 °F to +140 °F) Operating Temperature   -20 °C to +60 °C (-4 °F to +140 °F)     General Specifications   Cable Type   F/UTP (shielded) Packaging Type   Reel Pairs, quantity   4 Cable Component Type   Horizontal Jacket Color   Blue Product Number   3291B Conductor Gauge, singles   23 AWG Conductor Type, singles   Solid Conductors, quantity   8 Drain Wire Gauge   24 AWG Drain Wire Type   Solid Separator Type   Isolator     Mechanical Specifications   Pulling Tension, maximum   11 kg   |   25 lb Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system CENELEC EN 50575 compliant, Declaration of Performance (DoP) available