4 8 16 Zone Conventional Fire Alarm Panel System

4 8 16 Zone Conventional Fire Alarm Panel System   Product Description 4 /8816zones conventional fire alarm control panel   The SR-P01 is conventional Fire Alarm Control Panel, 4 zone/8 zone/16 zone , Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective SR-P01 Series can be used in a variety of low- to mid-sized applications.   Main feature Four, Eight, Sixteen Zone Style B (Class B) Initiating Device Circuits (IDCs), All zones accept two-wire smoke detectors and any normally-open contact devices. Two Supervisory Input with DC12V output, ideal to connect security alarm devices. Three General Alarm, Trouble and Supervisory, Form A Relay Output. One, Two, Four Built-in Sound Output, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs), NACs may be programmed: Silenceable or Non-Silenceable. 3.0 amps of total system power. Resettable DC24V & Non-resettable DC24V Output. Zone Input Short Circuit can be set to “Alarm” or “ Fault” mode. RS485 Communication Port (optional). Automatic/Manual mode can be programmed. Disable/Enable control per Zone (IDC) can be programmed. Disable/Enable Sound Output(NACs) can be programmed.     Technical Specification AC POWER: 220VAC, 50 Hz. BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for normal flat charge. Maximum battery charger capacity: 18AH battery. NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate battery box. Total DC24V system power: 3.0 amps. Maximum current per NAC: 1.25 amps. Maximum battery charging capability: 18 AH. Resettable four-wire smoke detector power output. Non-resettable power output. Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive)   Detailed pictuers This fire alarm control panel can Match any 2/4-wire smoke heat detector,strobe siren,fire bell,manual call point ect smoke detector 2 wire, 4 wire optiona, photoeletrci type heat detector 2 wire, 4 wire optional, rate of rise or fixed temeparture strobe siren wired type, with or without strobe fire bell wired type, indoor or outdoor type manual call point resettable type or breaking glass type optional Not only the alarm control panel we have, but also we offer all kinds of detectors if you want, we are looking forward to your inquiry, thank you Company Information    Shenzhen SUMRING Technology Co. Ltd is a Hi-tech enterprise specialized in the research & development of fire alarm and security products, including Fire alarm control panel, smoke detector,heat detector,gas detector, motion detector, fire alarm bell/strobe siren,  manual call point, magnetic contact, emergency exit etc.     Packaging & Shipping Shipping information * Express(UPS, DHL, Fedex, EMS, etc) is available. * Sea and Air delivery is available * welcome your agent to deal with our products .   FAQ   Q1. Can I get one sample for test before big order? A: Sure,you can. Please leave a message we will contact you soon. Q2. Can I get the gas detector than MOQ? A: Yes, you can and the final price will depend on your quantity. Q3. Can I print my logo on the gas detector? A: Yes, please contact us. Q4, What's the lead time when I place bulk order? A: Small Qty order needs5-7 working days, big Qty order usually needs 7-20 working days after payments arriving. That's depends on order Qty.     Chat now Tel: 86- 755-89571625 Fax: 86- 755-89571207 skype :+8613143051731 TradeManager:sumring Website: