5V20A Power Battery Capacity Tester 5v50a Testing Equipment Lithium Battery Charging And Discharging Machine Analyzer

5V20A（8ch）High-precision energy-saving (feedback type) battery capacity tester AITOP-BTS EC5208 ONE. Product Features:  uModular design, single-point control technology: easy expansion, high production and maintenance efficiency;  uChannel isolation and parallel technology are convenient for free combination and test in various occasions;  uCharge and discharge power factor 0.98, charge and discharge efficiency% 82 (Max 86%);  uMultiple charge and discharge protection functions to reduce the incidence of battery production accidents;  u The channel for discharging energy supplies other channels for charging energy or feeds back to the power grid, and the equipment heats up less and greatly reduces the energy consumption cost;  u The equipment accuracy is better than 0.1%, the data recording time is 1 second/time, the software function is powerful, and the man-machine interface is friendly; Four-wire interface, realizing wide-range voltage and current regulation, suitable for various batteries; 2. Equipment description BTS EC5 series battery capacity tester system is mainly designed for power cells, which can meet various performance testing requirements of power cells. The device has the characteristics of high power, high precision and high performance, and can perform charge and discharge tests and capacity division of batteries of 1-4.5V (voltage), 0.3-50A and other specifications. Device model Aitop-BTSEC5208 Input voltage ngle-phase single-phase 220V±10%/50HZ±0.5  interiorinput power 1000W  control method Single-point control & whole-cabinet control Fixture form According to customer requirements Fast interface RJ45 Number channels 8CH  Channel parallel  Support for<8CH paralleling way to install Frame type multi-layer single cabinet: 2 floors / 16CH 4 floors / 32CH charging voltage Charging voltage range: D C 0-4.5V, the maximum battery voltage is 4.5V discharge voltage Discharge voltage range: D C 4.5-1.8V, the maximum battery voltage is 4.5V charging current Charging current range: DC 0.3-20A, the maximum current is 20A discharge current Discharge current range: DC 0.3-20A, the maximum current is 20A voltage accuracy ±（0.1%RD+0.1%FS） Current accuracy ±（0.1%RD+0.1%FS） Voltage resolution 1mV The minimum unit used by the device in detecting or setting a voltage voltage stability ≤0.2% Current resolution 1mA The minimum unit used by the device in detecting or setting a current Current stability ≤0.2% Power output range 0.1～Pmax = Vmax * Imax Charging energy saving efficiency 80%（Max 85%） Discharge feedback efficiency 80%（Max 86%） Power precision ±（0.1%RD+0.1%FS） Power resolution 0.1w Power stability ≤0.2% Current response time Hardware response time at 20A: 200ms Time set range 0-9999 minutes in time units of h, min, s optional, with a resolution of 1s Time accuracy ≤±0.1% recording mode Charging record time, discharge record time, static record time, current change and voltage change record Record frequency Record data at 1 second Charging mode Voltage, current, time, and capacity Charging deadline Concurrent pressure, constant current pressure, constant current Discharge mode  constant current Dischargecut-off condition Voltage, current, time, capacity defencive function Abnormal data recovery; battery reverse connection protection function; software overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, voltage and current protection value range can be set, prompted and recorded; power module temperature is too high; abnormal communication; abnormal power grid frequency;   Number cycle steps More than 64 steps Continuouswork hours The power of the equipment shall meet the requirement that all channels can operate at full capacity for a long time Equipment noise less than 60dB circuit structure Modular structure design for easy installation and repair software SQL database record, items are not less than voltage, current, time, capacity, energy, etc., with the corresponding curve, can be output into EXCEL or JPEG file; has the function of setting automatic data guide as required. Provide lifetime free software upgrades service environment The altitude shall not exceed 1000m; the surrounding air temperature is 15℃ ~35℃; the humidity is <85%; the inclination is <5%; there shall not be explosive dangerous medium, the surrounding medium shall not corrode metal and harmful gas and conductive hostages that destroy insulation. plant maintenance Non-professional people, do not open the chassis. Operators should check the equipment joints regularly to prevent poor contact. size and weight Size 572*448*114mm；weight：≤12KG； transport Cars, ships, aircraft, trains , transportation process should  rain-proof Shenzhen Aitop Intelligent Equipment Co., Ltd. Website: Contact us : Email: whatsapp/wechat:+8618520989583 Looking forward to establish good business relationship with you in the new future 18650 sorter 18650 automating 10ch sorting machine Features: 10 ch sorter main achievement of the bulk material on a cylindrical battery, automatic cutting test, the robot automatic binning and other functions. Equipment according to the parameters set by the different battery internal resistance and voltage precision sorting by the robot to a different gear, this device implements the 10 sorting, and can be tested per hour with a group of about 80pcs/min batteries. No similar equipment in the industry is currently the fastest cylinder sorter. Batteries test data system to achieve database management, long-term preservation, traceability and strong. AITOP-1000 18650 sorter 18650 automating 10ch sorting machine   Features: 10 ch sorter main achievement of the bulk material on a cylindrical battery, automatic cutting test, the robot automatic binning and other functions. Equipment according to the parameters set by the different battery internal resistance and voltage precision sorting by the robot to a different gear, this device implements the 10 sorting, and can be tested per hour with a group of about 80pcs/min batteries. No similar equipment in the industry is currently the fastest cylinder sorter. Batteries test data system to achieve database management, long-term preservation, traceability and strong. model: aitop-1000 Single-phase 220VAC power: 0.8KW Working gas source: 0.5-0.6MPa Adaptation battery Dimensions: 18650 Separation efficiency: 80PPM above Weight: About 300KG Dimensions : Length 100 * W 140 * H 160cm instrument: Precision voltage resistance tester (optional) Sorting parameters: Open circuit voltage, AC resistance Open circuit voltage accuracy :± 0.1% rdg Display Resolution: 0.1mvΩ AC resistance accuracy: ± 0.5% rdg Display Resolution: 0.1mvΩ MODEL:AITOP-TY-1000   Voltage: 220V 50HZ   Power: 1.2KW Working pressure: 0.4-0.6MPa   AITOP-50 Feature 1 ,Imported energy storage power, welding voltage lockout technology to prevent network pressure fluctuations in the welding current. 2 ,Welding adjustable pulse width, small spatter, weld discoloration. 3 ,Discharge of imported IGBT module, enabling single-pulse and double pulse with multi-pulse welding. 4 ,Advanced technology: the continuous exchange with the international advanced inverter technology improvement and innovation. Dual pulse welding, welding and continuous pre-welding. Pre-solder oxide removal, remove debris, reducing the spark,, Continued solder joint cosmetics firm, no black, solder joints uniform size burr, does not affect the appearance of the product. 5 ,Adjustment easy to use: solder pin spacing is adjustable, suitable for fine components welding, alignment accuracy, high yield. Scope: 1 ,This professional welder power battery cells (thick slices 0.5mm or less) welding design. 2 ,18650 nickel belt suitable for welding, soldering connection battery, button cell welding, with guide wire between the nickel-metal hydride batteries and lithium batteries, nickel plate aluminum alloy nickel composite tape, appliance parts and welding wire, light bulbs foot welding, welding mobile power and cell phone battery. Welder MPU microcomputer control, pneumatically operated, small dimensions, with a protection circuit and alarm display, welding preheat wave, voltage fluctuation automatic compensation function to ensure stable energy output, high joint quality, easy maintenance, can improve the welding effectiveness. Suitable for high-volume production line. Manual spot welding machine MODEL:AITOP-50    Voltage: 220V 50HZ   Power: 0.5KW Working pressure: 0.25-0.4MPa Welding thickness: 0.1m~0.3mm nickel plating   Automatic Both side welding machine, MODEL:AITOP-700    Voltage: 220V 50HZ   Power: 3KW Working pressure: 0.4-0.6MPa Welding platform load：60kg Max 1. Machines which automatically Weld Nickel Sheet to Battery Cell Electrode. 2. Used for battery factories automatical production in power banks, laptops and ebikes, etc. 3. Do 2000pcs welding per hour.  4. Touch screen operation, easy and fast responding. 5. 0-1 worker to operate the machine, fast and with great efficiency.      Can be connected to other machines to proceed automatically. 6. Air cooling, manual programming & CAD drawing input available. 7. Overseas sales office in New Delhi, India. 8. 12 months warranty and life-time maintenance.   Techinical Parameters:   Power supply:  220V, 50HZ, 3.6Kw Use pressure: 0.3-0.8Mpa X Module travel: 0-350MM maximum 18 cores Y Module travel: 0-135MM maximum 7 cores X-axis emission batteries: 18PCS within Y-axis discharge batteries Number: Within 7 lines Dimensions: L1300 * W750 * H1300MM Machine weight: 150KG Productivity: 6 & 16 string, 5 & 16 strings, strings 4 & 16, 3 & 16 series, about 2000 batteries/ hour         PVC Shrinking Machine MODEL:AITOP-6040    Voltage:380V/50HZ    Power:10KW Conveying weight：20kg Max Shrinkage temperature:0-200℃ Conveying speed：0-10M/s Usage： The shrink film is wrapped on the outside of the product or the package, and after being heated, the shrink film shrinks and wraps the product or the package, fully displays the appearance of the article, improves the product's marketing performance, and increases the appearance and value. The articles packaged by the heat shrinkable machine can be sealed, moisture-proof, and anti-pollution, and protect the goods from external impact, and have a certain cushioning property, especially when the package is fragile, which can prevent the container from scattering when broken. In addition, it reduces the possibility of products being dismantled and stolen. It is applied to light industry, food, beverage, tableware, hotel supplies, stationery, arts and crafts, hardware tools, daily necessities, chemical products, etc. It adopts electronic grade variable speed transmission, which is stable and reliable, long life and low noise. Features： 1. The main electrical components are imported: 2, the device is small in size, short warm-up time, power saving 3. Adjust the width and narrowness of the reserved film before and after bag making according to the specifications of the product, and match the shrinkage ratio of different packaging films to achieve the ideal shrinkage effect; 3. The high-power circulating air motor is used to cooperate with the hot air flow of the furnace wall to conduct the hot air transport, so that the furnace produces uniform circulating air, the shrinkage effect is ideal and the heat energy loss is greatly reduced; 4. The shrinking furnace conveyor chain adopts rod type conveying, and the jacket has black high temperature resistant silicone tube, which is stable and does not burn film; 5, using German imported conveyor belt, high strength, wear resistance; 6, the heating pipe is a stainless steel heating pipe, the normal service life of 5-10 years. 7.Suitable for packaging of regular or irregular items Technical Parameter Specifications: 600mmx400mm (width * height) Packing product applicable specifications: 590mm wide * 390mm high * N long (within) Applicable packaging materials: PVC, POF, PE, PET, PP, Temperature control: 0-300 ° C (adjustable) Conveying speed: 0-12 m / min (adjustable) Voltage: 380V (three-phase four-wire) Current: 32A Power: 12KW Shrinking furnace dimensions (length x width x height): 1000x600x400mm Overall size (length x width x height) approx.: 1500x750x1370mm Delivery method: stainless steel / L, (network / W optional), Conveyor belt height from the ground: 750±5mm Delivery load: about 5.0KG Machine weight: 160KG Homogenizer: 2     Charging Discharging Aging Cabinet MODEL:AITOP-AG05-100 Voltage:380V/50HZ  Single channel power: 500W Charging and discharging voltage:0-5V Charging and discharging current:0-100A   Charging Discharging Aging Cabinet MODEL:AITOP-AG100-60 Voltage:380V/50HZ  Single channel power: 6KW Charging and discharging voltage:0-100V Charging and discharging current:0-60A     32series BMS tester MODEL:AITOP-8856   Voltage: 220V 50HZ   Power: 0.6KW Series connection:1-32S Overdischarge current:200A Max Overcharge/discharge voltage:0-5V This machine is designed for test protecting voltage of over charge, recovery voltage of over charge, protecting voltage of over discharge, recovery voltage of over discharge, protecting current of over current, delayed performance of over current protecting total current self consumption 1~32 series power battery protection board tester Application: TWSL-8856 multi-function PCB board testing system mainly faces the PCB board manufacturer and power battery pack manufacturer for detection of battery protecting board. Features: 1, Short circuit protection test 2, Self consumption of each PCB board test 3, Equalizing current and balance voltage test Detailed configuration: Item Range Accuracy Test rate of series 1-32 series optional Over charge protecting voltage 0-5V ±5mV Over discharge protecting voltage 0-5V ±5mV Over charge recovery voltage 0-5V ±5mV Over discharge recovery voltage 0-5V ±5mV Over charge protecting current 0-50A ±0.1A Over discharge protecting current 0-120A ±0.1A Balanced turn-on voltage 0-5V ±5mV Equilibrium real time current 0-1000MA ±1mA Over current protection delay 0-8S ±1mS Total self current consumption 0-10MA ±5uA Single self current consumption 0-500uA ±1uA Loop resistance 0-200mΩ ±1mΩ Short circuit protecting (more than 10 series) 0-9999u   24series BMS tester MODEL:AITOP-8858   Voltage: 220V 50HZ   Power: 0.6KW Series connection:1-24S Overdischarge current:200A Max Overcharge/discharge voltage:0-5V   Features: This machine is designed for test protecting voltage of over charge, recovery voltage of over charge, protecting voltage of over discharge, recovery voltage of over discharge, protecting current of over current, delayed performance of over current protecting total current self consumption 1~24 series power battery protection board tester.   Application: 1~24/32 series power battery protection board tester multi-function PCB board testing system mainly faces the PCB board manufacturer and power battery pack manufacturer for detection of battery protecting board. item value Place of Origin China   Guangdong Brand Name AITOP Model Number AITOP-8858 Product name Battery BMS Tester Application BMS/PCB WEIGHT 30KG Supply voltage 220V Current range 60-120A Size 410*422*200mm Keyword battery bms pcb tester Color Picture Display MOQ 1 Set Warranty 1 Year     Capacity tester 5V 3A，380v MODEL:AITOP-CT512-0503     Capacity tester 5V 6A，380v MODEL:AITOP-CT512-0506     The main function features of the equipment 1.Each device can perform constant current and constant voltage charge and constant current discharge test on 512 batteries that meet the voltage range. 2.Using the constant current-constant voltage power supply of the invention patent, there is no impact from constant current to constant voltage switching, which is especially suitable for the requirements of lithium ion battery charging. 3.The device uses an AVR single-chip computer as the control center. With the external sampling circuit, it can be controlled by the superior computer. When connected to the computer, it can save the full charge and discharge curve of all channels, and can also be separated from the upper computer and complete the operation through the control panel. Constant current constant voltage charge, constant current discharge test, time sorting and other work. 4.Each battery fully has its own constant current and constant voltage source, and its own loop does not affect each other 5.Real-time detection of each battery voltage, charging, the first constant current charging, when the battery voltage reaches the set value, will be smoothly transferred to constant voltage charging, to meet the set time or current termination conditions, the charge is over. During constant current discharge, when the battery voltage is lower than the set value, the discharge is completed and the corresponding battery indicator lights up. 6.With the power-off protection function, the original work flow can be continued after the call. 7.The power tube uses 50N06, suitable for batteries that require lower discharge voltages, such as lithium iron phosphate batteries. 8.The upper computer can set 32 process parameters and 256 cycles. Each host computer can connect 1 to 20 sets of single-chip microcomputer systems (10 sets or less are recommended). 9.Supporting software features. 10.a) Using graphic operation interface to display the data of each battery voltage, current, time, capacity, etc., and display the corresponding working status and abnormal conditions in various colors; 1.b) Any segmented battery capacity indication (up to 100 segments); 2.c) The data points can be recorded according to the voltage, current, and time variation conditions to form a complete charging and discharging curve data. The time interval of the curve data points is ≤ 4 seconds. 1.d) multiple conditions (capacity, time, open circuit voltage, discharge platform, etc.) for battery sorting; 1.e) automatically calculate the constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data; 1. f) Operator authority settings, classification operations; 2. g) can display charge and discharge curve diagram, cycle diagram; Number of device channels 512 channels (full screen control) ,AITOP-CT512 Sampling inspection interval ≤8 seconds/cycle Accuracy of current measurement ±0.1%FS Sampling Current Accuracy ±0.1%FS Voltage measurement range 0~5V，resolution 1mV Accuracy of voltage measurement ±0.1%FS Charge&discharge voltage range Charge：0~4.5V，discharge：4.5~2V(External connection length cannot exceed 2.5 meters) Constant voltage setting range 3 ~4.5V Constant pressure setting accuracy ±0.1%FS Time range 0~30000 minutes/step，accuracy：±0.1% Cooling method air cooling, upper air Fixture form Circuit connection between fixture and device is realized by terminal Working environment Temperature: 0~40°C, relative temperature ≤85% (No water condensation) Dimensions 1455mm (W) x 670mm (D) x 402mm (H) Power Supply Three-phase four-wire system,AC 380V±1 0%, 50HZ Full load power consumption ≤ 11KW     Rechargeable Cylindrical 18650 Cell 3.7V 1200Mah-5000Mah Lithium Ion Battery MODEL 18650 BATTERY Brand POWERSHIBA or OEM Voltage 3.7V Nominal Capacity 1200mah-2600mah Weight 43g Cycle life 1000times Dimension 18*65mm   32140 3.2V 15Ah 48Wh LifePo4 Cylindrical Rechargeable Lithium Battery Cells Item Specification Remarks Typical Capacity 15500mAh 0.5C5A discharge Minimum Capacity 15000mAh 0.5C5A discharge Nominal Voltage 3.2V   Discharging Voltage (Min) 2.0V   Charging Voltage (Max) 3.65±0.05V   Charging Current（Std） 3000mA 0.2C5A（0 ~ +45°C） Discharging Current（Std） 3000mA 0.2C5A（-20 ~ +60°C） Max Charging Current 15000mA 1.0C5A（0 ~ +45°C） Discharging Current（Max/Peak 3s） 75000mA 5.0C5A（-20 ~ +60°C） Max continuous Discharging Current 45000mA 3.0C5A（5 ~ +45°C） Internal Impedance ≤3.0mW AC Impedance 1kHz Cell Weight 300g About Storage temperature range ＜ 1 Month -20 ~ +60°C     ＜ 3 Month -20 ~ +45°C     ＜12 Month -20 ~ +25°C   Charging temperature range   0 ~ +45°C     Full Charge The charger supplies 0.2C5A constant current until battery voltage reaches 3.65V，then be changed at constant voltage of 3.65Vwhile tapering the charge current to less than or equal to 0.01C5A.Charging time is 5.0 hours in all.   Capacity ①Within 1 hour after fully charged, discharged at 0.5C5A continuously down to 2.0V. ³ 100% capacity   ②Within 1 hour after fully charged, discharge at 1.0C5A continuously down to 2.0V. ³ 95% capacity Cycle life A battery unit shall be repeated 3500 charge/discharge cycles, charged at CC-CV(0.2C5A-3.65V) for 5 hours, discharged at 0.5C5Acontinuously down to 2.0V Cut-off Voltage, Measure discharge capacity. ³ 80% capacity Capacity retention After fully charged, stored for 28 days at 20°C, then for 1 hour at normal temperature and continuously discharge at 0.2C5A to2.0V. Capacity retention rate ³ 95% Shenzhen Aitop Intelligent Equipment Co., Ltd. Website: Contact us : Email: whatsapp/wechat:+8618520989583 Looking forward to establish good business relationship with you in the new future