Quick Details
- Processing Time:30 working days
- Port:Guangzhou
- Supply Ability: 10 Sets Per Month
- Brand Name:Pego Electronics
GMP-1600 Goniophotometer Test System
1. Introduction:
GPM-1600
Goniophotometer test system is
designed according to CIE Pub.NO.70, CIE121, IESNA LM-79, IESNALM-75 and etc. Goniophotometer system is applied to test the photometric parameters of streetlight, downlight, room lighting fixture
and project lighting fixture, like luminous intensity distribution, luminous intensity at any angles,glare, effective beam angle, total luminous flux, upward luminous flux ratio, downward
luminous flux ratio, luminaire efficiency, utilization factor, luminance limitation curve,glare grade,and electric parameters (voltage, current, power, power factor, frequency).
2.
Configuration:
1) GPM-1600 goniophotometer:
● Rotating
console: Adopts German angle encoder system, and the rotation base can easy to mounting the lamps.
● Constant
temperature photo-detector: fi<3%
● Double
channel photometer: low drifting, high accuracy
● 3-D
English software: can output IES file, LDT file, CSV file, CIE file and etc.
● Cross-beam
laser alignment device for calibration
● Clamps
for lamp mounting
2) Luminous intensity standard lamp
WT104 digital power meter (AC/DC): voltage (0-600V), current(0-20A), power, power factor
(-1.000~1.000), frequency ( 45Hz-130Hz); accuracy:±0.4%+0.1%range+1digit
3) WL3010 CC&CV DC power supply: 30V/10A, sine-wave, constant current and constant voltage output. Output
voltage: DC 0.005V~30.00V;
Output current: 0.005A~10.00A,
output power: 300W (max)
4) CHP-1000VA AC power supply: 1KVA, power the luminiare under test. Output frequency: 45-65Hz, 50/60Hz; Output voltage: 0.0-300.0V; Output current: ≤8.4A
at 110V, ≤4.2A
at 220V
5) 19 inch cabinet: put the overall control system
6)
Computer and printer: prepare by user