Quick Details
- Material:Quality Metals
- Color:Gray
- Power:Mechanical
- Packaging:Wooden case
- Shipment:By air or sea
- Processing Time:7-20 days
- Port:Shenzhen or Guangzhou
- Supply Ability: 100 Sets Per Month
- Brand Name:Amade-tech
Shore A Durometer hardness tester
Hardness
tester is used to determine the hardness of vlucanized or thermoplastic rubbers.
Standards: ISO 7619, ISO 868, ASTM D 2240, DIN
53505 etc.
Shore A durometer is
for rubbers in the normal-hardness range.
Shore D durometer is
for rubbers in the high-hardness range.
Shore C durometer is
for rubbers in the low-hardness range and for cellular
rubbers.
Main parameters
Model
AT-R7002
Temperature
range
RT~200℃
Minimum
temperature display
0.1℃
Temperature
fluctuation range
±0.15
celcius degree
Heating
rate
About
15 celcius degree/min
Temperature
display resolution
0.01℃
Temperature
recovery time after clamping
<1.5min
Temperature
unit
℃,
℉,
Die
cavity
Biconical,
closed system, Sealed
Torque
range
0~20N.m
Torque
minimum reading
0.001N.m
Oscillation
angle
±0.5°(Standard),
±1°, ±3°
Oscillation
speed
100r/min
(1.67Hz)
Torque
accuracy
0.3%
Torque
unit
,
N.m, dN.m,
Data
acquisition rate
200Hz
Calculated
data
TS1,
TS2, T10, T30, T50, T70, T90, VC1, VC2
Software
connection
USB
Test
report printed contents
Date,
time, temperature, vulcanization curve, temperature curve, ML,MH, TS1, TS2, T10, T50, T90, VC1, VC2
Power
supply
220V+/-10%
or specified
Air
source
Min.
0.6Mpa
The pricing in the page is only for reference, please directly contact with us for more details based on order requirements
.