Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
special shape flap wheel 1 3
16inch
KEYING Special Shape
Sanding Flap Wheel is manufactured from high-quality
domestic cloth and pure imported cloth, this product uses imported binder (glue), sanding flap whee series have high performance, strong grinding force, synchronous consumption stability, long
service life, small dust, beautiful appearance, high-cost performance characteristics.
Special Shape Flap Wheel
1-3/16inch Specification:
Diameter: 1-3/16
inch=30mm
Max. RPM: 20000 RPM
Raw Materials: Aluminum
Oxide(AO), Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)
Grit Size: 40#~1200#
Shank Diameter:
3mm/6mm/3.175mm/6.35mm/8mm/10mm (Other sizes can be customized)
Special Shape Flap Wheel
1-3/16inch Materials that can be Worked
Aluminum
Cobalt-based alloys
Other non-ferrous
metals
High-temperature-resistant
materials
Nickel-based alloys (e. g.
Inconel and Hastelloy)
Bronze
Hard non-ferrous
metal
Titanium
Copper
Soft non-ferrous
metal
Brass
Stainless steel
(INOX)
Grey/nodular cast iron
(GG/GJL, GGG/GJS)
Annealed cast iron
Steel, cast steel
Flap Wheels with
Shank
30mm flap wheels with Shank is suitable for grinding
small area, dead angle, inner hole surface and slit gaps that difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich
in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force effeciently, meanwhile, can make sure the performance result achieve a slightly finer surface. It
is a good product for pre-painting or mirror finishing preparation procedure.
Advantages:
High flexibility to optimium
adapation to countours
Steadly high stock removal
through the entire tool life and aggressive coated abrasive resin is freed up constantly
The design of opening spaces
and flat bonded make the abrasive tools can process as face-down position, so can touch closely to the edges and corners.
Special Shape Flap Wheel
1-3/16inch Applications
Leveling
Deburring
Surface work
Weld dressing
Structuring (matt finishing,
brush matting and satin finishing)
Fine grinding in multiple
steps
Instructions:
Safety Warning of Special
Shape Flap Wheel 1-3/16inch
Please try to choose an
operation indoor environment and wear protective guards and goggles.
Never to exceed the
recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd
syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the
pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
Safety Warning:
The clamping lenght between
shank and grinders should be more than 15mm.
Never exceed the maximum
safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.