M10 Flap Wheel 3-1/8inch

KEYING M10 Flap Wheel is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, small dust, beautiful appearance, high-cost performance characteristics.   M10 Flap Wheel 3-1/8inch Specification: Diameter: 3-1/8 inch=80mm   Max. RPM: 9000 RPM   Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)   Grit Size: 40#~1200#   Shank Diameter: 3mm/6mm/3.175mm/6.35mm/8mm/10mm (Other sizes can be customized)   M10 Flap Wheel 3-1/8inch Materials that can be worked: Aluminium   Cobalt-based alloys   Other non-ferrous metals   High-temperature-resistant materials   Nickel-based alloys (e. g. Inconell and Hasteloy)   Bronze   Hard non-ferrous metal   Titanium   Copper   Soft non-ferrous metal   Brass   Stainless steel (INOX)   Grey/nodular cast iron (GG/GJL, GGG/GJS)   Annealed cast iron   Steel, cast steel   Flap Wheels with Shank 220 grit flap wheels with Shank is suitable for grinding small area, dead angle, inner hole surface and slit gaps that difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force effeciently, meanwhile, can make sure the performance result achieve a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedure.   Advantages： High flexibility to optimium adapation to countours   Steadly high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly   The design of opening spaces and flat bonded make the abrasive tools can process as face-down position, so can touch closely to the edges and corners.   M10 Flap Wheel 3-1/8inch Applications: Leveling   Deburring   Surface work   Weld dressing   Structuring (matt finishing, brush matting and satin finishing)   Fine grinding in multiple steps   M10 Small Flap Wheel 3-1/8inch Applicable Industries Applicable Industries ■ Chemical processing industries   ■ Building   ■ Steelworks   ■ Tool and mold processing   ■ Pipeline   ■ Shipping Building   ■ Automotive industry   ■ Aerospace, gas turbine treatment and repair   ■ Machine engineering   M10 Flap Wheel 3-1/8inch Applicable Industries Application Purpose ■ Leveling   ■ Deburring and Welding grinding   ■ Structuring Surfaces   ■ Step-by-step fine grinding   M10 Flap Wheel 3-1/8inch Applicable Industries   Instructions: Safety Warning of M10 Flap Wheel 3-1/8inch   Please try to choose an operation indoor environment and wear protective guards and goggles.   Never exceed the recommended maximum permitted rotational speed for safety reasons.   In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.   Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.