Brief Introduction:
The material of Oil Mist Separator filter is made of superfine glass fiber of HV and Lydall companies in America. Oil-gas mist in the compressed air can be completely filtered
through the filter element of the Oil Mist Separator.
Components applicable to Sullair screw air compressor:
Model
Original P/N
External diameter（mm）
Height（mm）
Goods No. of us
25
40
250034-112
250034-114
200
200
175
245
LF30217175
LF30217245
50
60
250034-116
250042-862
270
270
405
360
LF30221405
LF30210360
100
02250061-137
02250061-138
270
270
405
360
LF30221405
LF30210360
LS12
02250100-755
02250100-756
350
350
280
235
LF30427280
LF30414235
150
250034-085
02250048-734
350
350
620
460
LF30227620
LF30214460
Technical Parameters:
·Qil content of compressed air: 3~6PPm， Oil-gas granule of compressed air: ≤ 0.1μm
·Service life of the filter element: 3500~5200h (greatly affected by the quality of the lubricating oil and the working environment)
·Initial PSID (Pounds per Square Inch Differential): ≤0.02Mpa
·Lubricating oil should be controlled at prescribed position, which is commonly at 1/2~2/3 of the Oil Mist Separator /oil sight glass.
·Secondary oil return pipe and one way valve should be kept unimpeded and in the prescribed position.
·Exhaust steam pressure should be adjusted to the prescribed value.
·Make sure the air compressor works at proper temperature and the pressure valve is in good condition.
Applications:
