Quick Details
- Processing Time:within 35days after order confirmed
- Port:Qingdao
- Supply Ability: 1000000 Pieces Per Month
- Brand Name:HY
The two pcs ball valve works
by rotating the valve core to flow and keep the valve smooth or closed.
2 PIECE BALL VALVE
The 2pc ball valve is probably the most widely used
ball valve. 2-piece ball valves can quickly and easily open or close the flow of most liquids and gases for any application where a simple on/off action is required. It is also possible to
control the flow rate to varying degrees by partially opening or closing the valve. Also known as bi-directional ball valves because they allow direct flow in either direction from inlet to
outlet. As threaded ball valves, they are quick to install, easy to use and require no tools for installation. The two-piece ball valve is the best priced full port ball valve (full bore)
allowing the internal diameter of the pipe to remain unrestricted. This means that the 2pc Ball Valve has no pressure drop and maintains a high flow rate.
Threaded ports are female
NPT for easy connection
Full port ball valve,
maximum internal diameter also called full bore
Lockable handle lever with
anti-jet stem
Pressure ratings up to
1000PSI Suitable for most standard applications
PTFE seals and seats for
chemical and high heat applications
Sizes start at 1/4" and end
at 4"
Features
ISO 9002
Threaded ends to ASME B
1.20.1 (NPT) standard.
Investment casting
Explosion-proof valve
stem
Full Port
1000 psi W.O.G.
15% glass-filled PTFE
reinforced seats
PTFE seals and
packing
Mounting pad drilled and
tapped (1/4", 3/8" and 1/2" sizes only)
Latching handle
All valves tested and
inspected in accordance with API-598
Operational Principle
The two pcs ball valve works
by rotating the valve core to flow and keep the valve smooth or closed. The ball valve switch is light, small, and can be made into a large Size, reliable seal, simple structure and convenient
maintenance. The sealing surface and sphere are often closed, which is not easy to be eroded by the medium, and has been widely used in various industries. In the last laps of the hand wheel, the
angular plane at the bottom of the stem mechanically wedges against the sphere so that it is tightly pressed on the seat to a complete seal.
1. Nominal pressure or
pressure level: PN1.0-32.0MPa, ANSI CLASS 150-900, JIS10-20K;
2. Nominal pass diameter or
caliber: DN6~900, NPS 1 / 4 ~36;
3. Connection method:
flange, counterwelding, thread, bearing welding, etc.;
4. Suitable temperature:
-196℃ ~540℃;
5. Driving mode: manual,
cochlear worm transmission, pneumatic, electric, liquid movement, gas-liquid linkage, electric-liquid linkage;
6. Valve body materials:
WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8 (304), CF3 (304L), CF8M (316), CF3M (316L), and Ti. Choose different materials, which can be suitable for water, steam, oil products, nitric acid, acetic
acid, oxidative medium, urea and other media respectively
Certificate: ISO9000,
CE
If you are interested in our
products, please contact us.