Quick Details
- stylus angle:90-140 degree
- Processing Time:7days
- Port:Shanghai
- Supply Ability: 10000 Pieces Per Month
- Certification:CE
- Brand Name:HJ
The engraving stylus for HELL/MDC/OHIO machines are not only produced on sophisticated polishing benches, but during polishing, monitored by interference microscopy in order to secure the surface
finish. The angles of each individual stylus are measured with an in-house developed 3D laser measuring device. Strict quality control ensures that the products are manufactured to meet or exceed
the required specifications.
colors: metal color,golden color, blue color
1. One way/can be resharped
2. High speed(without wing) / low speed(with wing)
3. Stylus angle: 90-140 degree
4. Available brand: HELL, MDC, OHIO, etc.
5. PISA Stylus for all models
6. Provide re-sharpening service(repair)
New durable stable Diamond Engrave Stylus
Model:
1. Disposable/one way/single use
2. Reusable/can be re-sharpening/relap/resharpable
Available brand:
1. Hell high speed/low speed (4khz, 8khz, 12hkz)
2. Ohio 720, 820, 850, etc
3. GS 2215/1315/3615, etc
For Hell stylus:
1. High speed/without wing/tail
2. Low speed/with wing/tail
Stylus angle: 90-140 degree
Tips:
1. Pisa stylus and normal stylus all available
2. Provide re-sharpening service(repair)
Specification details of cylinder diamond engraving tools:
Germany HELL engrave stylus
90°-140°
K303 K304 K500 use to Germany HELL Engraving Machine. Symmetry and durable.
Switzerland MDC engrave stylus
90°-140°
Use to MDC Engraving Machine. Symmetry and durable.
America OHIO engrave stylus
90°-140°
Use to America OHIO 7 serial, 8 serial Engraving Machine. Symmetry and durable.
GS Serial engrave stylus
90°-140°
Use to Switzerland MDC GS3615 GS2215 GS1315 Engraving Machine. Symmetry and durable.
Sliding shoe for Engraving Machine
All kinds
Use to Germany HELL Switzerland MDC and America OHIO Engraving Machine.
Cutting edge for Engraving Machine
All kinds
Use to Germany HELL Switzerland MDC and
America OHIO Engraving Machine.
Switzerland MDC Rough cutting diamond and Fine cutting diamond for polishmaster
All kinds
Use to Switzerland MDC polishmaster rough-process and fine-process.
Polishmaster sword for polishmaster
All kinds
Use to MDC polishmaster Incise Tool. Tartness and efficiency.
Angles numbers:
110°, 115°, 120°, 125°, 130°, 135°, 140°
Application:
The stylus can be used for
Hell engraving machine kinds like K303, K304, K405, K5, K50, K500.
Daetwyler engraving machine kinds like 11, 12, 21c, 21ck etc and new generation 1315, 2215, 3625
Ohio engraving machine kinds like 720, 820,
1. Working principle for engraving styli
Engraving styli are used for incising the precise apertures on copperplate, the operating frequency is 8000 Hz (ie, up to 8000 apertures per second), various angles of the diamonds are available
for diverse using demand.
Our professional technicians and quality manage system obtains the minimum tolerance and high precision.
2. Using caution and cleaning for engraving styli
As we all know, diamond possesses the best hardness but poor roughness, so please do not tough the tip with your finger or textile fabrics, for even a slight touch would damage the tip and lead
to an inefficient stylus. The pyramid would explicate all.
A stone made pyramid would keep a certain structure since one above another, the above press won't destroy this structure, however, crosswise, a comparatively little force will ruin the whole
structure.
When engrave with an engraving stylus, the strength is mainly on its tip (just like the tip of a pyramid),so it is affordable. However, you touch the tip with your finger, it is more or less like
uncontrollable force to the unstable pyramid, then lead to a partial tip damage.Cleaning with compress container would lead to same aftermath, if a hard grit or even dust drops on stylus's tip
with a high speed, the stylus will get damaged.Furthermore, compress air would probably blow the copper scrap into the gravure system, which also influences a stylus' life.
3. How to clean the diamond of the stylus
Usually, we are not allowed to touch the diamond of the stylus, instead, we use HELL set-up system to set up or remove the stylus, in this way, you may avoid to touch the diamond.You're allowed
to clean the diamond after you make sure it necessary with microscope examination. By the way, the vacuum drawer of the HELL machine is available for copper pile.
