Orbital Hydraulic Motor Bms-80/Bms-100

Hydraulic orbit motor BMS BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.     Characteristic Features:     *Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.     *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.     *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Order Code:  Code Remarks BMS BMSS　  Displacement 80 100 125 160 200 250 315 375  Flange E2 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 BMS E4 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 F6 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6 W 4-Ø13.5 Wheel-flange Ø160,pilot Ø125×8 E2B 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4 SP 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3 D 4-Ø11 Circle-flange Ø125,pilot Ø100×6 BMSS E 4-Ø13.5 Square-flange Ø127,pilot Ø101.6×6.3  Output Shaft A Shaft Ø25 , parallel key 8×7×32                 BMS B Shaft Ø32 , parallel key 10×8×45 D Shaft Ø25.4 , parallel key6.35×6.35×25.4 G Shaft Ø31.75,parallel key 7.96×7.96×31.75 F Shaft Ø31.75,splined tooth 14-DP12/24 FD Long Shaft Ø31.75,splined tooth 14-DP12/24 SL shaft Ø34.85,Splined key 6-34.85×28.14×8.64 T1 Cone-shaft Ø35 ,parallel key B6×6×20 T3 Cone-shaftØ31.75,parallel key 7.96×7.96×31.75 S1 Shaft Ø25.4 ,splined tooth SAE 6B I Sub-shaft Ø22,splined tooth 13-DP16/32 Omit Short shaft 12-DP12/24 BMSS Port and Drain Port D G1/2 Manifold Mount 2-M10 , G1/4 M M22×1.5 Manifold Mount 2-M10, M14×1.5 S 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF P 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF  Rotation Direction Omit Standard R Opposite  Paint 00 No paint  Code Remarks BMS BMSS　  Displacement 80 100 125 160 200 250 315 375  Flange E2 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 BMS E4 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 F6 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6 W 4-Ø13.5 Wheel-flange Ø160,pilot Ø125×8 E2B 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4 SP 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3 D 4-Ø11 Circle-flange Ø125,pilot Ø100×6 BMSS E 4-Ø13.5 Square-flange Ø127,pilot Ø101.6×6.3  Output Shaft A Shaft Ø25 , parallel key 8×7×32                 BMS B Shaft Ø32 , parallel key 10×8×45 D Shaft Ø25.4 , parallel key6.35×6.35×25.4 G Shaft Ø31.75,parallel key 7.96×7.96×31.75 F Shaft Ø31.75,splined tooth 14-DP12/24 FD Long Shaft Ø31.75,splined tooth 14-DP12/24 SL shaft Ø34.85,Splined key 6-34.85×28.14×8.64 T1 Cone-shaft Ø35 ,parallel key B6×6×20 T3 Cone-shaftØ31.75,parallel key 7.96×7.96×31.75 S1 Shaft Ø25.4 ,splined tooth SAE 6B I Sub-shaft Ø22,splined tooth 13-DP16/32 Omit Short shaft 12-DP12/24 BMSS Port and Drain Port D G1/2 Manifold Mount 2-M10 , G1/4 M M22×1.5 Manifold Mount 2-M10, M14×1.5 S 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF P 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF  Rotation Direction Omit Standard R Opposite  Paint 00 No paint Omit Blue B Black S Silver grey  Unusually Function Omit Standard LL Low Leakage F Free Running LS Low Speed Main Specifications: Type BMS BMSE 80 BMS BMSE 100 BMS BMSE 125 BMS BMSE 160 BMS BMSE 200 BMS BMSE 250 BMS BMSE 315 BMS BMSE 375 Geometric displacement (cm3 /rev.) 80.6 100.8 125 157.2 200 252 314.5 370 Max. speed   (rpm) cont. 800 748 600 470 375 300 240 200 int. 988 900 720 560 450 360 280 240 Max. torque  (N·m) cont. 190 240 310 316 400 450 560 536 int. 240 300 370 430 466 540 658 645 peak 260 320 400 472 650 690 740 751 Max. output   (kW) cont. 15.9 18.8 19.5 15.6 15.7 14.1 14.1 11.8 int. 20.1 23.5 23.2 21.2 18.3 17 18.9 17 Max. pressure drop         (MPa) cont. 17.5 17.5 17.5 15 14 12.5 12 10 int. 21 21 21 21 16 16 14 12 peak 22.5 22.5 22.5 22.5 22.5 20 18.5 14 Max. flow   (L/min) cont. 65 75 75 75 75 75 75 75 int. 80 90 90 90 90 90 90 90 Max. inlet pressure      (MPa) cont. 25 25 25 25 25 25 25 25 int. 30 30 30 30 30 30 30 30 Weight  (kg) 9.8 10 10.3 10.7 11.1 11.6 12.3 12.6 * Continuous pressure :Max. value of operating motor continuously. * Intermittent pressure :Max. value of operating motor in 6 seconds per minute. * Peak pressure:Max. value of operating motor in 0.6 second per minute. Substitute Reference substance MOTOR CROSS REFERENCE TABLE HANJIU HYDRAULIC M+S HYDRAULIC EATON CHAR LYNN DANFOSS ROSS TRW WHITE CROSS PARKER SAM BREVINI BOSCH RECROTH BMM MM   MLHK J SERIES OMM BGM MGX BMP/BM1 MP    HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP BMR/BM2 MR HR MLHRW,RW S,T SERIES  W SERIES OMR DS  OMEW MB WR RE TF BR MGR GMR BMH/BM4 MH MLHH HW HWF OMH ME RE TG BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ HT MGT,GMT BMV MV MLHV 10000 SERIES OMV MGV GMV Hydraulic orbit motor applications:  Brush cutters  Mower  Haveresting equipment  Forestry equipment  Turf equipment