Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
A rapid test for the diagnosis of inflammatory condition by detecting CRP qualitatively in whole blood, serum or plasma CE certified
Applications:
The CRP Rapid Test Cassette (Whole Blood/Serum/Plasma) is a rapid chromatographic immunoassay for the qualitative detection of human CRP in whole blood, serum or plasma as an aid in the diagnosis
of inflammatory condition. The cut-off of the test is 10 μg/ml.
Description:
C-reactive Protein (CrP) in patient’s sera has been found in association with acute infections, necrotic conditions and a variety of inflammatory disorders. There is a strong correlation between
serum levels of CrP and the onset of the inflammatory process. Monitoring the levels of CrP in patient’s sera indicates the effectiveness of treatment and the assessment of patient recovery. It
is used in particular to differentiate bacterial infections from virus infections.
How to use?
Bring tests, specimens, buffer, and/or controls to room temperature (15-30°C) before use.
1. Remove the Test Cassette from its sealed pouch, and place it on a clean, level surface. For best results, the assay should be performed within one hour.
2. Open the tube with the diluted sample .Transfer 3 drops(approximately 120µL)of mixed specimens to sample well. Start the timer.
3. Wait for the colored lines to appear. The result should be read at 5 minutes. Do not interpret the result at 10 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
POSITIVE:* Two lines appear. One colored line should be in the control line region (C) and another apparent colored line should be in the test line region (T).
*NOTE: The intensity of the color in the test line region (T) will vary depending on the concentration of CRP antigen present in the specimen. Therefore, any shade of color in the test line
region (T) should be considered positive.
NEGATIVE: One colored line appears in the control line region (C). No line appears in the test line region (T).
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure
and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
NOTE:
1. The intensity of the color in the test region (T) may vary depending on the concentration of analytes present in the specimen. Therefore, any shade of color in the test region should be
considered positive. Please note that this is a qualitatively test only, and cannot determine the concentration of analytes in the specimen.
2. Insufficient specimen volume, incorrect operating procedure or expired tests are the most likely reasons for control line failure.
