Plastic Enclosure Mold For Electronic Device

In a Lego game, you will hold the laser, sit on the device, and shoot various targets. Since this game is mainly to meet the gaming experience of LEGO fans at a young age, the plastic product shell is required not only to be polished well, but also to be wear-resistant. In addition, because it is a laser electronic housing, it needs to be assembled with electronic components, so the precision requirements for plastic products are relatively high. Finally Green Vitality provide perfect plastic enclosure mold after first trial.   Plastic Injection Mold Steel Requirements For Electronic Enclosure Part Good polishing performance. Electronic enclosure plastic part injection mold materials usually require good gloss and surface condition. Therefore, the roughness of the cavity surface is required to below. In this way, the surface of the cavity must be surface processed, such as polishing, grinding, etc. Therefore, the selected plastic injection mold steel should not contain rough impurities and pores.   Less affected by heat treatment. In order to improve the hardness and wear resistance, the electronic enclosure plastic injection mold is generally heat-treated, but this treatment should make the size change small. Therefore, it is best to use pre-hardened steel that can be machined.   Good wear resistance. The gloss and accuracy of the surface of the electronic enclosure injection mold material are directly related to the wear resistance of the surface of the injection mold cavity, especially when glass fiber, inorganic fillers, and certain pigments are added to some plastics. Together with the plastic melt, it flows at a high speed in the runner and mold cavity, and the friction on the surface of the cavity is great. If the material is not wear-resistant, it will wear quickly.   Basic Information for Electronic Injection Molded Enclosures Plastic Enclosure Mold Specification Description Electronics enclosure plastic mould Plastic material PC/ABS Mould dimension(mm) 380*700*360 Mould weight (kg) 750kg Mould cavity&core steel P20 Nos of Cavity 1+1 Manufacture time (day) 30 days Mould life ≥300 000 Molding cycle (S) 35s Mold Characteristics Get the perfect part for production after the first trial Short cycle time   Plastic Injection Mold Steel Requirements For Electronic Enclosure Part Good polishing performance. Electronic enclosure plastic part injection mold materials usually require good gloss and surface condition. Therefore, the roughness of the cavity surface is required to below. In this way, the surface of the cavity must be surface processed, such as polishing, grinding, etc. Therefore, the selected plastic injection mold steel should not contain rough impurities and pores.   Less affected by heat treatment. In order to improve the hardness and wear resistance, the electronic enclosure plastic injection mold is generally heat-treated, but this treatment should make the size change small. Therefore, it is best to use pre-hardened steel that can be machined.   Good wear resistance. The gloss and accuracy of the surface of the electronic enclosure injection mold material are directly related to the wear resistance of the surface of the injection mold cavity, especially when glass fiber, inorganic fillers, and certain pigments are added to some plastics. Together with the plastic melt, it flows at a high speed in the runner and mold cavity, and the friction on the surface of the cavity is great. If the material is not wear-resistant, it will wear quickly.   As a plastic mould supplier, we will do our best to meet all the needs of customers.