Single Phase 220V, Three Phase 380V AC Drive 0.4-15kw Variable Frequency Inverter Mini Type VFD

Product Description FC100E Series (0.4~15kW) Mini vector inverter FC100E series is an economical and mini inverter developed by Janson Controls. It has the advantages of small size and high cost performance. It adopts open-loop vector and V/F control technology, can realize asynchronous motor control with high-performance current vector control technology. Product Parameters Electrical Specification Input Voltage Single Phase/Three Phase 200~240V,  Three Phase 380~440V Fluctuate no more than±10%,Imbalance Rate <3% Input Frequency 50/60Hz ± 5% Output Voltage 0V~Input Voltage Output Frequency Vector Control:0~300Hz V/F   Control:0~3200Hz Performance Overload Capacity 150% rated output current for 1 minute, 180% rated output current for 2 seconds Control Method Open-loop vector control (SVC), V/F control Run Command Setting Method Operation Panel Setting, External Terminal Setting,Communication Setting Speed Setting Method Digital setting, analog setting/pulse setting, communication setting Speed Setting Resolution Digital setting: 0.01Hz, Analog setting: 1% X maximum frequency Speed Control Accuracy SVC:±0.5% Speed Control Range SVC:1:100 Torque Control Response SVC:<200ms Starting Torque SVC:150% rated torque/0.5Hz Special Feature Programmable Input & Output Terminals Input& Output terminal function can be edited Process PID Adjustment Function Built-in process PID module Simple PLC Function Built-in simple PLC module, which can realize timing and multi-segment frequency output Textile Wobble Function Built-in textile swing frequency function module Protective function Overvoltage Stall Bus voltage automatic control to prevent overvoltage fault Automatic Current Limiting Protection Output current is automatically limited to prevent over-current faults Overload Pre-Alarm & Alarm Overload Pre-warning and protection Output Phase Loss Protection Output phase loss automatic detection and alarm function Overvoltage & Overflow Stall Control Automatically limit current and voltage during operation to prevent frequent over-current and over-voltage tripping Output Short-to-Ground Protection Effective protection function for output short circuit to ground Output Phase-to-Phase Short Circuit Protection Output interphase short circuit effective protection function Input & Output External analog power supply +10V,load capacity 100mA External digital power supply +24V,load capacity 200mA Analog Input AI1:Voltage 0~10V/0-20mA Analog Voltage Output AOV:0~10V Analog Current Output AOI:0~20mA Digital Input DI1~DI5(DI5 can be selected as a high-speed pulse signal) Digital Output FM:FM can be selected as high-frequency pulse signal output Relay output TA/TB/TC:Contact rating 250VAC/3A or 30VDC/1A MODBUS Communication A+,B- Operation Display LED Display Set frequency, output frequency, output voltage, output current, motor speed, output torque, digital terminals, status parameters, programming menu parameters and fault codes etc. Indicator Light 3 units indicators, 3 status indicators Environmental characteristics Working Temperature -10~+40ºC, Maximum temperature is 50°C, Air Temperature change is less than 0.5°C/min,40~50ºC Derating is required, output current derating 2% for each 1ºC Storage Environment Temperature -40~+70ºC Application Indoor, free from direct sunlight, dust, corrosive gas, flammable gas, oil mist, water vapor, dripping water or salt  etc. Altitude Less than 1000 meters, derating is required for more than 1000 meters Humidity Less than 95%RH, no condensation Vibration resistance 3.5m/s² at 2~9Hz, 10m/s² at 9~200Hz (IEC60721-3-3) Protection Degree IP20 Pollution Level Class 2 (dry, non-conductive dust pollution) Certification CE The whole series has passed CE certification Optional accessories Keypad The whole series supports external keyboard through standard network cable Model Selection Item No. Adaptable Motor (kW) Input Current (A) Output Current (A) Rate Capacity (kVA) W (mm) H (mm) D (mm) Diameter (mm) GW (kg) 1 Phase Input and 3 Phase Output  220V (-15%~+15% Tolerance) FC100E-2S-0.4G 0.40 6.50 2.10 0.70 85.00 142.00 116.00 Ø5 1.30 FC100E-2S-0.75G 0.75 8.20 4.00 1.50 85.00 142.00 116.00 Ø5 1.30 FC100E-2S-1.5G 1.50 14.00 7.00 3.00 85.00 142.00 116.00 Ø5 1.30 FC100E-2S-2.2G 2.20 23.00 9.60 4.00 85.00 142.00 116.00 Ø5 1.30 FC100E-2S-4.0G 4.00 39.00 16.50 5.90 106.50 240.50 148.00 Ø5 3.50 FC100E-2S-5.5G 5.50 60.00 25.00 8.50 106.50 240.50 148.00 Ø5 5.00 3 Phase Input and 3 Phase Output  220V (-15%~+15% Tolerance) FC100E-2T-4.0G 4.00 19.00 16.50 5.90 106.50 240.50 148.00 Ø5 4.00 FC100E-2T-5.5G 5.50 28.00 25.00 8.50 106.50 240.50 148.00 Ø5 5.00 FC100E-2T-7.5G 7.50 35.00 30.00 11.00 106.50 240.50 148.00 Ø5 5.20 FC100E-2T-11G 11.00 47.00 45.00 16.00 106.50 240.50 148.00 Ø5 5.60 3 Phase Input and 3 Phase Output  380V (-15%~+15% Tolerance) FC100E-4T-0.75G 0.75 3.40 2.10 1.50 85.00 142.00 116.00 Ø5 1.50 FC100E-4T-1.5G 1.50 5.00 3.80 3.00 85.00 142.00 116.00 Ø5 1.50 FC100E-4T-2.2G 2.20 5.80 5.10 4.00 85.00 142.00 116.00 Ø5 1.50 FC100E-4T-4.0G 4.00 10.50 9.00 5.90 95.00 180.00 120.00 Ø5 3.50 FC100E-4T-5.5G 5.50 14.60 13.00 8.90 95.00 180.00 120.00 Ø5 3.50 FC100E-4T-7.5G 7.50 19.00 17.00 11.00 106.50 240.50 148.00 Ø5 4.00 FC100E-4T-11G 11.00 28.00 25.00 16.00 106.50 240.50 148.00 Ø5 5.00 FC100E-4T-15G 15.00 35.00 32.00 21.00 106.50 240.50 148.00 Ø5 5.20 1 Phase lnput 220V and 3 Phase Output 380V(-15%-+15% Tolerance) FC100E-2S4T-0.75G 0.75 7.50 2.50 1.50 85.00 142.00 116.00 Ø5 1.50 FC100E-2S4T-1.5G 1.50 11.00 3.70 3.00 85.00 142.00 116.00 Ø5 1.50 FC100E-2S4T-2.2G 2.20 15.00 5.00 4.00 85.00 142.00 116.00 Ø5 1.50 FC100E-2S4T-4.0G 4.00 26.00 8.50 5.90 95.00 180.00 120.00 Ø5 3.50 FC100E-2S4T-5.5G 5.50 39.00 13.00 8.90 95.00 180.00 120.00 Ø5 3.50