T8 36/40W Magnetic Flourescent Light Fixture Lamp Fixture CFL Light Bases

T8 36/40W lighting fixture, fluorescent lamp fixture :   Model And Specifications: Model and spec:              i.       ZM120M1C1-C1: T8/T10-1*17/18/20W;             ii.       ZM130M1C1-C1: T8/T10-1*30W;            iii.       ZM140M1C1-C1: T8/T10-1*32/36/40W;            iv.       ZM160M1C1-C1: T8/T10-1*58/65W;   Voltage: 180-230V/50/60Hz, Material Feature: Housing: 0.25mm cold-roll steel, hardness more than 140, white painting, good anticorrosion performance, not easy to wear, no changing color within 3 years; Lamp holder: pp material; Wire: aluminum coated copper wire, 0.4mm2; Design Feature: The bottom and the cover of the bracket are all made of new rolling forming process, edge treatment, compared with the traditional stamping process, ensure the material thickness and characteristics of the products, increase the overall hardness above 50%, a better structure; The bottom of the bracket ends are keeping the standard 20mm diameter holes, convenient support series by PVC tube The side of the bracket maintains the traditional plane design, increasing stent volume of space for bigger control gears; According to the international safety standard requirements, the bottom of the bracket increased two stiffeners 3mm outward, ensuring that the power supply driving far from the mounting surface 3mm; The cover increased two sets of plastic buckle, which increased the stent appearance decoration, also replaced the transmission screws lock; Available Light Source: Traditional T8 lamp 18W (the tube length without pins are 589-590mm); Traditional T10 lamp 20W (the tube length without pins are 589-590mm); Control Gears: built-in aluminum  wire magnetic ballast, collocated starter, rapid start, noiseless, more than two years life span; Installation Attention: the fixtures are ceiling luminaires, can be ceiling mounted, or hanging; Taking off the cove from the bottom, mounting on the lamp holders, fixed bottom on the expansion screw sleeve of the mounting surface by long enough screws, and tighten the screws; or fastening with the lifting rope the suspender; guiding the electric power into the terminal, putting back the cover, mounting on the lamp; The fixtures have IP20 protection class only, no water-proof and explosion-proof function, only be installed indoor or the place where is no rain, cannot be directly installed in the combustible material surface or covered by insulating material;   Packaging & Shipping Package: Every piece packed into poly bag or paper box; 16pcs/ctn; Exported standard carton, Carton size: 64*21*12.7cm. Application: Office, supermarket, meeting room, business centre, hospital, work room, restaurant, Indoor parking lot, school, and other indoor lighting required.