High Quality Cheap Price Dual Axis Solar Tracker Sun Tracker For PV

DAT has been applied to a PV system (silicon or thin film panels) installed mostly in northern hemispheres. In these areas, due to low rise of sun position, array distance for either Fixed or SAT Systems need to be wider which does not meet economic efficiency standards. DAT is the best choice for the purpose of power generation. There are mainly three different models of DAT: MST-100, MST-300/350 and MST-400. With 10 to 60 square meter panels on each tracker, one Controller program can command up to 6 trackers. The basic features of the program are backtracking, high wind protection, and preset positioning for panel cleanup and snow mode. Technical details: Model MST-300: Ground / Roof Type --- PV & CPV Tracker Type of Solar Tracker: Dual Axis Tracker with linear actuator for tilting and slew drive for positioning. Tracking Accuracy (Up to 16m/s)： ± 0.1°(including deflection in wind at all points on array) Design Temperature Range: - 40°C to +70 °C Operation temperature range: - 30°C to +55°C Maximum Operational Wind Speed: 22m/s (79km/hr) - at which speed the system moves into stow position Absolute Maximum Wind Speed: 40 m/s Array Area: up to 6 m2 / (depends on module dimension and weigh) Post Height: 2.3m Maximum Height: 3.66 m Weight: 600 kg (excluding modules) Payload: kg (Solar modules only) System Design Lifetime: 25 years Elevation Tracking Range: 0°to 75° Azimuth Tracking Range: 0~270°and 0~450°(For different latitude use) Control Type: Light sensor + Historic tracking Tracking Type: Dual-axis tracking Automatic high wind stow function (option with wind speedmeter) Emergency stop button on tracker Safety Feature: Safe positions for maintenance operations IP Rating IP 65 Labview remote monitoring (option) Control Box Power Supply Source: 110/ 220V AC