FUJI Fka/FDA Absolute Pressure Transmitter

Product Description FUJI FKA Absolute Pressure Transmitter(DC4~20mA+HART protocol) FUJI FDA Absolute Pressure Transmitter( FOUNDA TION Fieldbus protocol or PROFIBUS-PA) 1.Product Introduce   Fuji FCX -AIII version FKA/FDA Absolute pressure transmitter can achieve absolute pressure measurement in equipment such as gas removal system, distillation tower, evaporator and crystal device, and allows pressure under 10MPa. A absolute stress transmitter on one side of the Δ room is accepted to be measured by the absolute pressure signal, and the other side is closed into a high vacuum benchmarking room, and then converted to 4 to 20mA DC signal output.   The FKA/FDA Absolute pressure transmitter utilizes a unique micromachined capacitance silicon sensor with advanced floating capsule structure and newer micro-processing technology, the transmitter has high accuracy, good stability, safety and reliability, and easy to use.   FCX-AIII series transmitters with safety funtion have obtained the certificate of SIL certification by TÜV. 2: Products Features: 1. High accuracy Absolute Pressure transmitter can be carried out with high accuracy measurement in the range of 1.6-50000kPa. Standard accuracy: ± 0.1% High accuracy(optional):± 0.065%   2. Excellent operability and easy to use It has an excellent operability and easy to use in any application. All range meet the requirements of explosion-proof. 5-digit digital indiactor Stainless steel AMP case Built-in RFI filter and lightning arrester Various anti-corrosive materials Built-in local configurator with 3 push buttons   3. The transmitter can communicate using FUJI, HART, communication protocol, and also can use FOUNDATION FIELDBUS or PROFIBUS protocol after changing the electronic circuit. 3: Products Specification: Measured fluid:  Liquid,Gas,or vapour Range, operating pressure, and overrange limit:  Output signal: (1)FKA: DC4~20mA+HART protocol                          (2)FDA: FOUNDA TION Fieldbus protocol or PROFIBUS-PA Power Supply: General DC10.5 ~ 45V                          Intrinsic safety  DC10.5 ~ 26V                          With arrestor  DC10.5 ~ 32V 4: Product Parameter Diaphragm Materials: SUS316L,Hastelloy-C Accuracy ranting:( For spans greater than1/10 of URL ±0.1% or ±0.2%,high accuracy(Optional) ±0.065% Output signal/ Power supply: DC4-20mA/DC10.5~45V(Non-Explosion) Promote/inhibit : -100%~+100%URL Containment structure: JIS C0920 Immersion type(Equivalent IEC IP67,NEMA6/6P Explosion-approvals: NEPSI, FM, ATEX, IECEx, CSA, TIIS Ambient temperature: Sensor unit: -40~350?C  / Electronics: -40~85?C Process connection : "1/2-14NPT, Rc1/4, Rc1/2, 1/4-18NPT, M20×1.5"   Ordering information   1. Model code 2. Span 3. Please select the direction of output (Notuse/OVER/UNDER) when the transmitter is fault (Burnout). If unspecified, it is Notuse. 4. Please select the output mode (linear or square root). If unspecified, it is linear mode. 5.  If the scale of indicator is selected to actual scale (9th code: D,H,P,S), please select the items of display (digit, scale, unit , etc). 6.  Please select the tag plate according to need.(up to 14 digit, consist of lettters and numbers).   Xi'an Tosi Da Technology Co., Ltd Address: RM11710,building3,ZhuQue,Street,YanTa,District,Xi'An City,China.