EPS Sandwich Board Wall Panel Machine Production Line

I   Equipment Feature  This machine adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading  no-woven cloth, compounding and repressing. The equipment runs stably with  high automatic degree, and the specification of its product can be adjusted arbitrarily.  II Project Feature 1. The source of the production raw materials is widely with no regional restriction.  The product is made of sawdust, straw (rice hulls), many kinds of crop straw and  inorganic material (such as talcum powder, infusorial earth and powder coal ash)  after special technology. So this project have low production cost, small investment  and fast effectiveness. 2. The equipment has high automatic degree, simple production technology, low  labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production. 3. Low production energy consumption. With the influence of chemical reaction, it  can meet the requirements about production technology without high temperature  and high pressure. III.Product Feature and Performance 1 Air-dry density ≤ (Standard index)50kg/m2 (Test Value) 30.0kg/ m2 2 Drying shrinkage  rate of the board ≤0.08% 0.015% 3 Anti-breaking load ≥1400N 5640N 4 Anti-impact No breakage phenomenon  such as cracking after  three impacts No breakage  phenomenon  such as cracking after  three impacts 5 Thermal resistance  of main section (T=90mm) ≥1.35(m2.k)/w ≥1.36(m2.k)/w 6 Thermal bridges area ratio ≤8% 2.22% 7 Sound insulation Index   36dB 8 Radioactivity   None IV.Wall Board Feature 1. Anti-earthquake with light quality: In view of its weight per unit area is only 1/10 of red brick wall, the product has good anti-earthquake performance. It can be used at low-rise building and high-rise building, and it is preferred to be used at workshop with steel frame structure. It can replace the color steel plate with its better performance. 2. Fast and convenient operation: It can be installed by board or combination with the dry method, and the product can be nailed, cut, planed, drilled and sticked.  3. Low comprehensive cost: The product is made of agricultural and industrial wastes, so the production cost is low. With the low load of girder and short construction period, it can reduce over 20% of engineering cost after compared with solid brick and hollow brick. 4. Energy-saving and environmental protection: The production processing need no high temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no toxicity, harm, pollution and radioactivity. 5. Increasing the usage area: Under the same condition of heat-preserving and sound insulation, with the thinner plate, the product can increase over 10% usage area after compared with the same building. 6. Having the following features: fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging.    V.Production Conditions Wall board production line has workshop and raw material warehouse. Workshop: over 300m2-800 m2, worker: 10-16 person; fresh water; electricity:8-20KW   VI. Benefit Analysis  (I) Cost accounting Raw material: 19-25 Yuan/ m2 (according to different thickness); Wage: 1 Yuan/ m2 Water-electricity fee: 0.5 Yuan/ m2; Depreciation of the equipment: 0.2Yuan; Management fee: 1 Yuan/ m2 Total: 21.7 Yuan~27.70 Yuan/ m2  (II) Profit analysis: (Take the small-scale equipment as example)  production: 800 m2 per day, at the price of 58 Yuan/ m2 to sell, and then the profit per day is that 800 m2 ×58 Yuan/ m2-800 m2×21.7~27.70=29040~24240 Yuan. VII.Services We not only supply MgO Board Production Lines, but also provide other services like: 1. Assemble machines at customer's factory 2. Production techniques training 3. Machine up-grade and maintenance