KCB GEAR OIL PUMP

KCB gear oil pump use Model: KCB 200; KCB 300; KCB 483.3; KCB 135; KCB 55; KCB 83.3; KCB 633; KCB 960; KCB 2500; KCB 3800; KCB 5400; KCB 1600. KCB series gear pump is suitable for conveying lubricating oil or liquid similar to lubricating oil without solid particles and fibers, non-corrosive, temperature not higher than 80℃, viscosity of 5×10-6 ~ 1.5×10-3m2/s (5-1500CST). Pump drainage and return chute has reasonable design, is a gear in the work under torque force is small, so the bearing load is small, wear small, pump with high efficiency. KCB gear pump is a kind of general oil pump, and used widely, convenient maintenance, favored by the majority of customers love, KCB gear pump has been applied more widely over the years a industrial pump. KCB gear oil pump is composed of pump body, front and rear cover, gear, main and passive shaft, bearing, valve and shaft end seal, etc. KCB gear pump structure is simple and compact, easy to use and maintain, stable operation, stable use. KCB gear pump is suitable for conveying medium viscosity not more than 150mm2/S, KCB gear pump temperature not higher than 12080℃, no corrosive, no hard particles impurities and fibers of heavy oil, diesel oil, mechanical oil, vegetable oil and other liquids with similar properties.If transferring gasoline, please select diaphragm pump product. KCB gear pump is mainly used in petroleum, chemical industry, metallurgy, mining, KCB gear pump power station and other industries oil medium transfer, pressurization, fuel oil and other large machinery and equipment in the dilute oil circulation, KCB gear pump in all kinds of machinery and equipment can be used as a lubrication pump. KCB series gear pump is mainly divided into stainless steel and ordinary material, gear pump flow range is divided into: 0.6 cubic to 5 cubic, 6 cubic to 60 cubic, 70 cubic to 580 cubic three levels, the use pressure from 0.3 to 2.5 range, can be different requirements for different flow stage customers. In addition, my company with years of experience in the production of gear pump can be customized according to customer requirements of different materials, different pressure, different suction of the gear pump, gear pump, ordinary material, stainless steel material can be, welcome customers to visit the site to order! KCB gear oil pump is a rotary pump that relies on the working volume change and movement formed between the pump cylinder and meshing gear to transport liquid or make it pressurized. Two enclosed Spaces are composed of two gears, pump body and front and rear covers. When the gear rotates, the volume of the space on the gear's detent side increases from small to large, forming a vacuum that sucks in the liquid. The volume of the space on the gear's meshing side decreases from large to small, squeezing the liquid into the pipeline. The suction and discharge cavities are separated by the meshing lines of the two gears. Gear pump outlet pressure depends on the size of the pump source resistance. This pump has the self-priming, each time before the pump does not need to fill liquid, simple and compact structure, easy to use and maintain. The pump by the liquid automatic lubrication daily work, do not add lubricating oil and elastic coupling transmission power can compensate for the small deviation caused by the installation, in the hydraulic impact of the buffer. KCB gear pump is composed of pump body, pump cover, gear, bearing sleeve and shaft end seal. Gear pump gear, shaft by nitriding treatment, a higher hardness and wear, gear and shaft installed together in the shaft sleeve. Gear pump pump operating components are used to transport the medium lubrication. The four bearings inside the pump are installed in the pump body, and the end clearance is automatically adjusted with the working pressure, so the pressure of the pump is stable, the output flow pulsation is small, the volume ratio is high.