The new HVZ-UNI-II is more
universal in use, more robust in design and more easy to adjust
this device incorporates the
experience of
2 decades in mechanical
installation.
It can be used in conjunction
with the laying machine VM-X/301/401/203/204 as well as other carriers which provide two hydraulic circuits to operate the clamp. The main and side clamps are controlled directly from the
carrier.
Further information
Setting of the main and side clamping width made easy without tools by using scale pointers.
The side clamping arms swing up completely in order to allow laying close to a wall sideways without any gap.
The powerful side clamp achieves easy shifting of pavers into the running bond.
Gripping depths and height of the support wheels can be adjusted without tools easy and quickly.
Pushing-off technology ADV guarantees installation complying with the regulations: During the laying process the individual pavers creep
apart by approx. 0.5 – 1 mm (in addition to the spacer bars). This joint distance must not be eliminated by hammering!
Because the pavers can not rock during the laying process, time consuming readjustment is avoided.
Pushing off device ADV as a standard
feature integrated.
2 C-Profiles 760 mm long and 10 Positioning Adapters to shift pavers by 100 mm.
Low deadweight.
Main gripping width can be set much more easily via a spindle with integrated spring assembly instead of the previous chain centring
method.
Significantly increased displacement force for problem-free movement into the running bond ( 3 x greater than with the HVZ-UNI).
New suspension – enabling the clamp to hang with less movement.
Durable surface protection by galvanizing.
