Common Nails

1.20x20mm-6.5x200mm The manual nail-making is completely off the question because this way, we cannot ensure quality. Therefore, nail-making machines are used worldwide for the manufacturing of wire nails. These machines are used in the production of both special and conventional nails. When talking about the structure of these machines, they adopt the plunger structure. This type of structure buffers noises and enhances the overall speed of nail manufacturing. In order to produce wire nails, a huge roll of wire is placed into a machine. The machine threads the wire and cuts it into the desired length. After that, the point and head of the nail are created by the same machine. Finally, after going through a series of other programs, the wire nails are collected into a bin. The same machine could be used for manufacturing nails of different sizes. You just have to alter the adjustment of the machine and it would produce the wire nails of the size that you desired. One of the important parts of these machines is the polishing drum. The task of this drum, as the name suggests, is to polish the wire nails if they get rusty during the process of making. For this, added, and the machine takes about 40 minutes to an hour for polishing the wire nails. That is how the wire nails are manufactured. If we sum up the whole making of wire nails into three steps, it would include wire drawing, nail making, nail polishing, and meter and packing. No matter how tiny wire nails look from the outside, the process that it takes to make them is quite intense. The good quality nail keeps its shape no matter how forcefully it is hammered. That is exactly what is kept in mind while creating wire nails.