We are looking for a OEM manufacturer for Nylon product. Buyer and Importer
Product Concept
An extremely lightweight, durable air mattress for mountain climbing, hiking and camping.
Materials:
We have experimented with metalized reflective nylon (mylar) which is good for weight but has a few problems with durability. Looking for suggestions for proper material.
Current samples made with 2.5 mil nylon orange on bottom surface, and 1.0 mil metalized reflective nylon silver on top surface.
Characteristics, the product must conform to:
Material must be stabilized, NO stretching.
Water and abrasion resistant for both silver and orange color.
Non toxic, must pass ALL USA safety standards
Must withstand 115 kilograms weight for 24 hours
Dimensions Inflated 23-1/2 wide x 73 tall (approx)
Deflated 36 wide x 73 tall (approx)
Packaged bulk single folded 6'' wide x 19 (approx)
Outer cradling tubes 3-3/4 diameter (approx)
Inner cushion tubes 2-3/4 diameter (approx)
Must weigh less than 200 grams
We are trying to hold the weight to under 200 grams but are somewhat flexible on both weight and size. This original size was limited to the machinery capabilities, other designs (tapered, including a pillow, smaller, narrower) have been prototyped and narrowed down to this again due to limitations and costs. We are open to changes if needed or to improve the design.
Construction: Heat welded, with 64 mm minimum perimeter seal, Excess material trimmed to 95 mm
Need valve for inflating and deflating
Manufacturing Volume: Year 1, 50,000, Year 2, 100,000, Year 3, 200,000
We have photo's or existing samples to show you.
Please reply to my email: mike (at) ekongroupltd.com
Or by phone: +86 135 0103 2773lized reflective nylon (mylar) which is good for weight but has a few problems with durability. Looking for suggestions for proper material.
Current samples made with 2.5 mil nylon orange on bottom surface, and 1.0 mil metalized reflective nylon silver on top surface.
Characteristics, the product must conform to:
Material must be stabilized, NO stretching.
Water and abrasion resistant for both silver and orange color.
Non toxic, must pass ALL USA safety standards
Must withstand 115 kilograms weight for 24 hours
Dimensions Inflated 23-1/2 wide x 73 tall (approx)
Deflated 36 wide x 73 tall (approx)
Packaged bulk single folded 6'' wide x 19 (approx)
Outer cradling tubes 3-3/4 diameter (approx)
Inner cushion tubes 2-3/4 diameter (approx)
Must weigh less than 200 grams
We are trying to hold the weight to under 200 grams but are somewhat flexible on both weight and size. This original size was limited to the machinery capabilities, other designs (tapered, including a pillow, smaller, narrower) have been prototyped and narrowed down to this again due to limitations and costs. We are open to changes if needed or to improve the design.
Construction: Heat welded, with 64 mm minimum perimeter seal, Excess material trimmed to 95 mm
Need valve for inflating and deflating
Manufacturing Volume: Year 1, 50,000, Year 2, 100,000, Year 3, 200,000
We have photo's or existing samples to show you.
Please reply to my email: mike (at) ekongroupltd.com
Or by phone: +86 135 0103 2773
Show More
- Posted On:19 Jun, 2024
- Company Name:Show
- Contact Number:Show
- Purchaser:Michael P. Sweeney