My boss is looking for a company to become our new manufacture of stash boxes. The stash boxes will be 7.5 (L) inches x 7 (w) inches x 2.75 (H) inches. Within the box we would like 3 compartments. one large compartment 6.85 (L) x 3.5 (W) x 1.5 (H) Two smaller compartments of 3.25 x 2.7 (W) x1.5 (H) (These Measurements can be adjusted to fit correctly if needed) We would also like a 2.75 inch compartment on the lid. Included in the stash box we would want a Grinder, a sealed Jar, a woodroller (all shown in the picture) A weed rolling cone seen in second picture. ( if you cannot supply any of these items I can get them thru another manufacture. ) We would like the stash box to have some type of lock or closing mechanism so it cant open randomly. We will put our logo on the box, but have not yet decided how. We will either put it on the inside lid similar to the picture below, laser engrave it, or laminent sticker. Which ever is least expensive. Our logo is attached below. We are open to listen to what the cheapest material would be to create this. It does not need to be bamboo or wood. What ever is cost effiecent. Our first box we will look to make will be all black. The only thing we will add color to would be our logo if we decide to add it. We will also need each one of these boxes to come in an 8x8x3 card board box for shipping. (depening on price we may add our logo to the card board box) We have someone doing these boxes already, but were looking for another supplier to lower the cost. We would like to start with a test order of 25 (50 at most) I look forward to hearing from you! Show More