Requirement for Plywood Buyer and Importer

HelloMy name is Andrew Troha from Australia I am looking for LVL beams for the construction Industry in Australia.The quotation I am after would have to include the followingThe LVL I am after could be made from softwood such as Styrax, Pine or Poplar or mixed with some hardwood such as Acacia. I would require a moisture content of about 8-10%. 2 times Hot pressing With outside surfaces sandedDue to government regulations we need to use a phenolic glue with E0 rating or betterWe cannot use melamine glueThe size I require is 95mm x 63mm x 3600mm 95mm x 63mm x 4800mm I would require the outside of the beams to be painted all around.As well as each beam having type markings paint on them.First order would be 1 container with orders after that being 1-3 containers per month.Regardsto include the followingThe LVL I am after could be made from softwood such as Styrax, Pine or Poplar or mixed with some hardwood such as Acacia. I would require a moisture content of about 8-10%. 2 times Hot pressing With outside surfaces sandedDue to government regulations we need to use a phenolic glue with E0 rating or betterWe cannot use melamine glueThe size I require is 95mm x 63mm x 3600mm 95mm x 63mm x 4800mm I would require the outside of the beams to be painted all around.As well as each beam having type markings paint on them.First order would be 1 container with orders after that being 1-3 containers per month.Regards Show More