Looking for Mill 1800kg, 1410*1410*1860mm cnc milling machine for sale Buyer and Importer

Hello SirWe need the best price for following CNC against one of our order 4 pcs each. It look the CNC lathe & CNC Mill will suit. Pls check with the following specsCNC turn Centre System :- Siemens - 828D or better Capacityo Swing Over Bed :Not less than 450 mmo Maximum Turning Dia :Not less than 300 mmo Maximum Turning Length :Not less than 450 mm Axiso X-axis stroke : 200mm minimumo Z-axis stroke : 450mm minimum. Rapid X-Z : 20m/min. Or higher. Acceleration X-Z : 5 m/s2 or better Resolution X-Z : 0.005 min. or better Feed for X :10 m/min. Or higher Feed for Z :10 m/min. Or higher Main Spindle specificationo Spindle power: 4kW- 5kW.o Standard Chuck Size :-250 mm Motorized Coolant System Tank Capacity 150L Min. Coolant system 1kW Electro Pump Automatic Tool Turreto No of tools :08o Tool shank for OD turning 2mmo Tool shank for ID turning :30mm minimum Programmable quill.o X Axis Rapid Rate 15-20 m/min.o Z Axis Rapid Rate 15-20 m/min- Provision for DNC through RS232C port Provision for DNC through PCMCIA ATA card up to 32 MBCNC Milling / CNC Vertical Machining centre CNC System : Siemens 840D or Latest version of Siemens• TABLE SIZE: 500 x 250 mm (Minimum)• MACHINE CAPACITYo X – AXIS TRAVEL 400 mm minimumo Y - AXIS TRAVEL 300 mm minimumo Z - AXIS TRAVEL 300mm minimum Feedo -Rapid X/ Y/ Z AXES - Std. 40 / 40 / 40 M/min. minimumo Cutting feed 1 - 10000 mm / Min.• Linear Motion (Integral Hardened)• Automatic tool changer (ATC)o No. of Tools - Std. / Opt. 20 / 24 Nos.o Max.tool dia with all pockets 80 mmo Max. Tool dia with adjacent pockets empty 155 mmo Tool length Max : 250 mmo Tool shank Type BT40• Accuracy with rotary encoder• Positioning for x, y & z axes as per ISO 230-2 0.010 mm• Repeatability for x, y & z axes as per ISO 230-2 0.010 mmStandard Features Auto tool clamp –declamp Brake motor for vertical axis Air required 113L/Min 6.9bar (4SCFM) AC unit for electrical cabinet Built-in-in lighting system Provision for DNC through RS232C port Provision for DNC through PCMCIA ATA card up to 32 MB. Coolant system 1kW Electro Pump, Tank capacity at least 150Ltrs or more with Chip tray. Standard Accessories and services Job Clamping Elements suitable for 60-150 mm jobs. ER Type Collet Chuck with Set of Collets ( 3 –32 mm) Standard Tool Holders – End Mill, Face Mill, Drill Chuck Hydraulic Vice 150mm – with handle.Your early action will be appreciatedThanksVinod Peswanithe following specsCNC turn Centre System :- Siemens - 828D or better Capacityo Swing Over Bed :Not less than 450 mmo Maximum Turning Dia :Not less than 300 mmo Maximum Turning Length :Not less than 450 mm Axiso X-axis stroke : 200mm minimumo Z-axis stroke : 450mm minimum. Rapid X-Z : 20m/min. Or higher. Acceleration X-Z : 5 m/s2 or better Resolution X-Z : 0.005 min. or better Feed for X :10 m/min. Or higher Feed for Z :10 m/min. Or higher Main Spindle specificationo Spindle power: 4kW- 5kW.o Standard Chuck Size :-250 mm Motorized Coolant System Tank Capacity 150L Min. Coolant system 1kW Electro Pump Automatic Tool Turreto No of tools :08o Tool shank for OD turning 2mmo Tool shank for ID turning :30mm minimum Programmable quill.o X Axis Rapid Rate 15-20 m/min.o Z Axis Rapid Rate 15-20 m/min- Provision for DNC through RS232C port Provision for DNC through PCMCIA ATA card up to 32 MBCNC Milling / CNC Vertical Machining centre CNC System : Siemens 840D or Latest version of Siemens• TABLE SIZE: 500 x 250 mm (Minimum)• MACHINE CAPACITYo X – AXIS TRAVEL 400 mm minimumo Y - AXIS TRAVEL 300 mm minimumo Z - AXIS TRAVEL 300mm minimum Feedo -Rapid X/ Y/ Z AXES - Std. 40 / 40 / 40 M/min. minimumo Cutting feed 1 - 10000 mm / Min.• Linear Motion (Integral Hardened)• Automatic tool changer (ATC)o No. of Tools - Std. / Opt. 20 / 24 Nos.o Max.tool dia with all pockets 80 mmo Max. Tool dia with adjacent pockets empty 155 mmo Tool length Max : 250 mmo Tool shank Type BT40• Accuracy with rotary encoder• Positioning for x, y & z axes as per ISO 230-2 0.010 mm• Repeatability for x, y & z axes as per ISO 230-2 0.010 mmStandard Features Auto tool clamp –declamp Brake motor for vertical axis Air required 113L/Min 6.9bar (4SCFM) AC unit for electrical cabinet Built-in-in lighting system Provision for DNC through RS232C port Provision for DNC through PCMCIA ATA card up to 32 MB. Coolant system 1kW Electro Pump, Tank capacity at least 150Ltrs or more with Chip tray. Standard Accessories and services Job Clamping Elements suitable for 60-150 mm jobs. ER Type Collet Chuck with Set of Collets ( 3 –32 mm) Standard Tool Holders – End Mill, Face Mill, Drill Chuck Hydraulic Vice 150mm – with handle.Your early action will be appreciatedThanksVinod Peswani Show More