PET SHEET SPECIFICATIONS 1.)PET (Polyethylene Terephthalat) to be extrusion on sheet form 2.) Sheet thickness to be 1 mm+- 0,05 mm 3.) Sheet width to be 1230mm+-3mm 4.) Sheet area density to be 900 grams/m2 5.) PET draw resistance minimum 100 Kpa 6.) No deformation between -30 C and +60 C 7.) PET to be with holder, with 70% titan dioxide compound additive 8.) Conformity to EN-ISO11925-2 standards, with PET holder, with B2 ignition delaying compound granules additive 9.) PET granule can be Du-Pont Artenius branded 10.) One surface of PET Sheet to be with sand pattern or orange pattern with 50-60 microns depth 11.) Protective film, PVC blue color and 70 micron thickness, to be pasted on the sand patterned surface or orange patterned surface 12.) The other surface of PET Sheet to be with 42 Corona. 13.) Color code of PET Sheet to be appropriate to (RAL 9016) 14.) PET surface to be overlaid (no light passing) 15.) PET Sheet should be rolled; roll length can be 700 meter. All rolls to have equal length. 16.) Inner diameter of PET Roll to be 160 mm. 17.) Rolls should be rolled quite tight, loose rolling not allowed. Show More