Buy Monel 400 Weldolet, Sockolet,Threadolet,Elbolet Buyer and Importer
Monel 400 Weldolet, Sockolet,Threadolet,Elbolet
Name: Mary Zhu
Email: mary (at) htpipe(dot)com
MSN: htpipemary (at)hotmail(dot)com
Skype:htpipemary
Alloy 400, UNS N04400, NS111, DIN 2.4360
Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire.
ASTM Specifications
Pipe
Smls Pipe
Welded Tube
Smls Tube
Welded Sheet
/Plate Bar Forging Fitting Wire
B165 B725 B163 B127 B164 B564 B366
Chemical Composition, %
C Mn S Si Ni Cu Fe
.30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max
Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness
(HRB)
Rod & Bar Annealed 75-90 25-50 60-35 60-80
Rod & Bar Cold-Drawn
Stress Relieved 84-120 55-100 40-22 85-20 HRC
Plate Annealed 70-85 28-50 50-35 60-76
Sheet Annealed 70-85 30-45 45-35 65-80
Tube & Pipe
Seamless Annealed 70-85 25-45 50-35 75 max *
4. Characteristics:
Resistant to seawater and steam at high temperatures
Excellent resistance to rapidly flowing brackish water or seawater
Excellent resistance to stress corrosion cracking in most freshwaters
Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations,
but is seldom the material of choice for these acids
Excellent resistance to neutral and alkaline salt
Resistance to chloride induced stress corrosion cracking
Good mechanical properties from sub-zero temperatures up to 1020F
High resistance to alkalis
ary
Alloy 400, UNS N04400, NS111, DIN 2.4360
Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire.
ASTM Specifications
Pipe
Smls Pipe
Welded Tube
Smls Tube
Welded Sheet
/Plate Bar Forging Fitting Wire
B165 B725 B163 B127 B164 B564 B366
Chemical Composition, %
C Mn S Si Ni Cu Fe
.30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max
Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness
(HRB)
Rod & Bar Annealed 75-90 25-50 60-35 60-80
Rod & Bar Cold-Drawn
Stress Relieved 84-120 55-100 40-22 85-20 HRC
Plate Annealed 70-85 28-50 50-35 60-76
Sheet Annealed 70-85 30-45 45-35 65-80
Tube & Pipe
Seamless Annealed 70-85 25-45 50-35 75 max *
4. Characteristics:
Resistant to seawater and steam at high temperatures
Excellent resistance to rapidly flowing brackish water or seawater
Excellent resistance to stress corrosion cracking in most freshwaters
Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations,
but is seldom the material of choice for these acids
Excellent resistance to neutral and alkaline salt
Resistance to chloride induced stress corrosion cracking
Good mechanical properties from sub-zero temperatures up to 1020F
High resistance to alkalis
Show More
- Posted On:01 Jul, 2024
- Company Name:Show
- Contact Number:Show
- Purchaser:Mary Kong (Ms.)