We would appreciate if you could inform whether the following specifications are available wiyh you. Your early reply will be highly appreciated. With Regards Savas Ozgen 1-Long Fibre Cellulose: Cellulose: should be produced 100% from the needle leaf tree Whiteness :Min. %80(on Elrepho 457 filter) Grinding conditions: Reaching 26-30 oSR(490-425 CSF) a- 30. minutes max with Valley-Beater grinding b- max. 4,300 total revolution with PFI grinding Physical properties:According to Tappi,Scan or ISO test procedures, at the degree 26-30 oSR grinding: a- Breaking strength: Breaking length(m),min.: 7,500 or Breaking index(N.m/g),min :73,6 b- Tearing strength : Factor(100 gf.m2/g),min : 102 or, Index(N.2/g)min. : 10 c-Explosion strength :Factor(100 gf/cm2.g/m 2) :45 Index(N.m2/g).min .4.4 Dirtiness(ppm-mm2/m2) .5 max totally Humidity : %12+/- 3 Ash(%) :0,5 max 2-Short Fibre Cellulose Cellulose should be produced from the wide leaf tree Whiteness: Same as in needle leaf cellulose Grinding conditions. Smae as in needle leaf cellulose Physical properties: According to Tappi,SCAN or ISO test procedures at the 26-30 oSR grinding degree: a- Breaking strength : Breaking length(m),min. 5,500 Breaking index(N.m/g),min. 53.9 b-Tearing strengthh : Factor( 100 gf.m2/g),min. 75 or, Index(N.2/g),min . 7.4 Explosion strength: Factor(100 gf/cm2/g/m2) . 30 or, Index(N.m2/g),min : 2,9 Dirtiness and ash values are exactly as same as in the needle leaf cellulose. 3- Mechanic Wooden Cellulose Whiteness min. % 70( on Elrepho 457 filter) Breaking strength : min 20(25 oSR) Tearing index,min. : min. 3(25 oSR) (N.m2/g) Opasity : Min. 75(25 oSR) Humidity : 12^+/- 2 4-OCALIPTUS Whiteness min%80(on Elrepho 457 filter) Grinding rpm 0 1250 2700 3700 5100 oSR 17 20 25 30 40 Breaking index20.4 57.4 71.4 76 79.3 (N m2/g) Explosing index.min 0.6 2.9 3.8 4.2 4.7 (N m2/g) Opasity(%) 80.2 75.8 73.1 71.8 69.9 Dirtiness : 5max (totally) (ppm. mm2/m2) Humidity %12 13 Ash(%) 0.5 max. Show More